StarTech.com MSA Uncoded SFP+ Module - 10GBASE-T

The StarTech.com MSA Uncoded SFP+ Module - 10GBASE-T is a versatile copper SFP+ transceiver engineered to deliver reliable 10 Gigabit Ethernet over existing copper cabling. As an MSA-compliant SFP+ module, it is designed to work with a wide range of 10GBASE-T capable switches and routers, making it an excellent choice for upgrading networks without the expense and complexity of fiber upgrades. With a maximum reach of up to 30 meters on Cat6 or Cat5e cables, this module unlocks high-speed connectivity for data centers, server rooms, and enterprise networks that rely on copper infrastructure. Its copper-based design minimizes deployment costs while preserving performance, enabling easier upgrades to 10 GbE for edge deployments, rack-to-rack connections, and backplane integrations. The SFP10GBTST is built for reliability, offering plug-and-play installation, robust build quality, and compatibility across multiple vendors that support copper SFP+ transceivers, ensuring a smooth transition to faster networks without vendor lock-in.

• Broad compatibility: MSA-compliant SFP+ copper module that works with 10GBASE-T capable switches and routers from a wide range of vendors.
• Cost-effective copper solution: leverages existing Cat6/Cat5e cabling to deliver 10 Gigabit Ethernet without fiber optics or expensive rewiring.
• Plug-and-play and hot-swappable: drop-in installation into standard SFP+ ports with minimal downtime in most environments.
• Optimal distance for office and data-center edges: supports up to 30 meters (98.4 feet) over copper cabling, ideal for rack-to-rack or desk-to-switch links.
• Reliable performance with broad ecosystem support: tested for stable 10 GbE connectivity, low latency, and consistent throughput across compatible devices.

Technical Details of StarTech.com MSA Uncoded SFP+ Module - 10GBASE-T

• Model: SFP10GBTST
• Type: MSA-compliant copper SFP+ transceiver
• Interface: SFP+ to RJ-45 copper interface for 10GBASE-T
• Data Rate: 10 Gbps (10 Gigabit Ethernet)
• Cable Type: Cat6/Cat5e twisted-pair copper cabling
• Distance: Up to 30 meters (98.4 feet)
• Compliance: MSA-standard copper SFP+ module designed to work with 10GBASE-T capable devices

How to install StarTech.com MSA Uncoded SFP+ Module - 10GBASE-T

• Verify that your switch or router supports SFP+ copper modules and 10GBASE-T operation, and confirm that the device is in a suitable state for hot-swapping if applicable.
• Power down the system or ensure you are in a hot-swap compliant environment according to your equipment manufacturer’s guidelines.
• Identify an available SFP+ slot on the device and remove any blank module or existing SFP+ module if required, handling the component by its edges.
• Insert the SFP10GBTST module into the slot until it seats securely and the latching mechanism engages with a click.
• Connect a Cat6 or Cat5e Ethernet cable to the RJ-45 port on the transceiver, ensuring a firm connection to both ends of the link.
• Power on the device (if needed) and verify the link status through the console or management interface. Check that the port negotiates to 10GBASE-T and that the link is stable.
• Configure the port as required on the switch or router—enable auto-negotiation if your network requires it, and apply any QoS or security policies as part of standard network provisioning.

Frequently asked questions

• Q: What is the maximum distance for this SFP+ copper module? A: Up to 30 meters (98.4 feet) on Cat6/Cat5e copper cabling.
• Q: What cables are supported? A: Category 6 (Cat6) and Category 5e (Cat5e) twisted-pair copper cables are supported for 10GBASE-T operation.
• Q: Is this module compatible with multiple switch brands? A: Yes. It is an MSA-compliant copper SFP+ transceiver designed to work with 10GBASE-T capable switches and routers from many vendors. Always verify compatibility with your specific hardware model.
• Q: Is installation hot-swappable? A: In most cases, yes—the module is designed for hot-swapping in compatible SFP+ ports. Consult your device’s manual for exact hot-swap procedures.
• Q: Do I need special configuration after installing? A: Typically no. Auto-negotiation handles speed and duplex settings, and port configuration to 10GBASE-T is often automatic. Some setups may require enabling the port for 10G operation in the switch management interface.