Startech.com MSA Uncoded Transceiver - 10GBASE-BX WDM SFP+ (10 Gbps) - 10 Gigabit Bidirectional Module

The Startech.com MSA Uncoded Transceiver delivers high-performance 10 Gigabit Ethernet over single-mode fiber with flexible, cost-effective deployment options for data centers and enterprise networks. Designed to be MSA-compliant and uncoded, this 10GBASE-BX WDM SFP+ bidirectional (BiDi) module brings the efficiency of wavelength-division multiplexing to a compact, hot-swappable form factor. With its single-mode fiber compatibility and SFP+ footprint, it pairs seamlessly with a wide range of switches, routers, and media converters, enabling long-reach connections without the need for extra encoding or complex infrastructure. Ideal for spine-leaf architectures, campus LANs, and metro networks, the Startech.com uncoded transceiver is engineered for reliability, interoperability, and straightforward installation.

• High-performance 10 Gbps BiDi solution: The MSA uncoded transceiver enables 10 Gigabit Ethernet over single-mode fiber using bidirectional wavelengths, reducing fiber count and connector complexity while maintaining robust link quality and low latency. It is ideal for data centers and enterprise networks that demand fast, scalable uplinks and interconnects without sacrificing cost efficiency.
• MSA-compliant, uncoded SFP+ design: Built to the MSA standard, this transceiver interoperates with a wide array of third-party network equipment. The uncoded design means there is no added encoding or FEC overhead, delivering straightforward, predictable performance across diverse hardware ecosystems.
• Single-mode fiber with WDM BiDi technology: Utilizing wavelength-division multiplexing, this module transmits and receives over paired wavelengths (Tx and Rx) on a single fiber, freeing up spare fibers and enabling longer-reach links between data center cores or campus networks while maintaining a compact footprint.
• Compact, hot-swappable SFP+ form factor: As a hot-plug, plug-and-play module, it snaps into any compatible SFP+ port and powers on without disruptive downtime. Its compact design makes it suitable for dense equipment racks and high-density switching environments where space is at a premium.
• Broad compatibility for data centers and enterprise networks: This transceiver is engineered for seamless integration with a wide variety of switches, routers, and optical networking equipment from leading vendors, helping you standardize your network hardware and simplify inventory management while delivering reliable 10 Gbps connectivity over long distances.

Technical Details of Startech.com MSA Uncoded Transceiver - 10GBASE-BX WDM SFP+ (10 Gbps) - 10 Gigabit Bidirectional Module

• Data rate: 10 Gbps
• Form factor: SFP+ transceiver
• MSA: MSA uncoded SFP+ BiDi transceiver
• Media type: Single-mode fiber (OS2 recommended)
• Wavelengths: Transmit around 1310 nm; Receive around 1550 nm (typical BiDi pairing)
• Interface: LC duplex optical connector
• Distance capability: Suitable for long-reach links over single-mode fiber (actual distance depends on fiber and system configuration)
• Color/indicators: Standard SFP+ indicator lights for link/activity
• Compliance: MSA-compliant, hot-swappable, plug-and-play
• Power requirements: Compatible with standard SFP+ power budgets (per device specification)

How to install Startech.com MSA Uncoded Transceiver

• Power down (or prepare for hot-swapping) your device if required by your equipment policy, then locate an available SFP+ port on your switch, router, or media converter.
• Remove the SFP+ transceiver slot cover if necessary and verify the port is clean and free of debris.
• Insert the Startech.com MSA uncoded transceiver into the SFP+ port until it seats firmly and the latch clicks, ensuring the transceiver is fully engaged in the slot.
• Connect the single-mode fiber pair to the LC duplex connectors on the transceiver, ensuring correct Tx/Rx orientation with the opposite end’s BiDi module or the corresponding pair configured for your link. Use clean, properly terminated OS2 fiber cables and pull protection if required.
• Power up or verify the device recognizes the module. On your network switch or router, configure the port if necessary (e.g., speed/duplex negotiation, VLANs, and link policies). Check the link status lights and run a basic connectivity test to confirm a stable 10 Gbps link.
• Monitor the link for stability and performance. If issues occur, reseat the module, re-check fiber cleanliness, and verify that the other end uses a compatible BiDi counterpart. Consult the device’s logs or management interface for any diagnostic messages.

Frequently asked questions

• What is an MSA uncoded transceiver? An MSA uncoded transceiver is a standardized, plug-and-play optical module that does not apply additional encoding (FEC) to the transmitted signal. It relies on the host system’s interface and optics to manage data integrity, offering straightforward operation and broad interoperability within MES and data-center environments.
• What is 10GBASE-BX WDM BiDi? 10GBASE-BX WDM BiDi is a bidirectional transceiver technology that uses wavelength-division multiplexing over a single fiber pair. It transmits in one direction on a 1310 nm wavelength and receives on a 1550 nm wavelength, enabling two signals to share one fiber pair and reducing fiber infrastructure requirements.
• What kind of fiber do I need? This transceiver is designed for single-mode fiber, typically OS2, with LC duplex connectors. Ensure that both ends of the link are matched with compatible BiDi transceivers or appropriate receiver/transmitter pairs for proper operation.
• Is this transceiver hot-swappable? Yes. As a standard SFP+ module, it supports hot-swapping in systems that allow live insertion and removal, minimizing downtime during deployment or maintenance.
• Will it work with my network switches? The MSA-compliant uncoded SFP+ transceiver is designed for broad compatibility with many vendors’ switches, routers, and optical equipment. Always verify the SKU, firmware compatibility, and the intended link distance with your equipment vendor’s documentation to ensure seamless operation.