StarTech.com PoE+ Industrial Fiber to Ethernet Media Converter 30W - SFP to RJ45 - SM/MM Fiber to Gigabit Copper Mini Size IP-30

Designed to bridge distant network segments with reliability and efficiency, the StarTech.com PoE+ Industrial Fiber to Ethernet Media Converter 30W delivers seamless data and power over a single, compact enclosure. This rugged, mini-sized device is built for challenging environments where copper Ethernet alone can’t reach, yet where power delivery to remote devices matters just as much as fast, dependable connectivity. With a PoE+ budget of up to 30 watts and a versatile SFP uplink to RJ45 copper port, it’s an ideal solution for distributing both network access and power to cameras, wireless access points, sensors, and other IEEE 802.3at-enabled devices in industrial facilities, campuses, warehouses, and harsh outdoor settings. The product combines compact form factor, rugged construction, and plug-and-play simplicity to extend your network without sacrificing performance or reliability.

• PoE+ power delivery with flexible data — This media converter transfers data between fiber and copper while delivering PoE+ power to connected devices, enabling risk-free deployment of IP cameras, access points, and other PoE-enabled equipment in distant or hard-to-reach locations.
• SFP to RJ45 fiber-to-copper conversion — An integrated SFP uplink slot accommodates standard fiber modules, allowing you to connect to fiber backbones and convert to Gigabit copper on the RJ45 side for end devices. This enables reliable long-haul links and easy integration into existing networks.
• SM/MM fiber support for versatile deployment — The converter is designed to work with both single-mode and multi-mode fiber, giving you the flexibility to select the right fiber type based on distance and infrastructure, from short-run campus networks to longer outdoor installations.
• Industrial IP-30 rugged enclosure in a compact size — Built to withstand demanding environments, the IP-30-rated metal enclosure provides robust protection against dust and minor impacts while maintaining a small footprint ideal for rack-adjacent or wall-mounted installations.
• Plug-and-play and maintenance-free operation — With auto-negotiation and no complex configuration required, this media converter is designed for quick setup and reliable, low-maintenance operation in distributed locations, reducing downtime and enabling rapid expansion of your network reach.

Technical Details of StarTech.com PoE+ Industrial Fiber to Ethernet Media Converter 30W - SFP to RJ45 - SM/MM Fiber to Gigabit Copper Mini Size IP-30

• Power over Ethernet (PoE+): Provides PoE+ power to connected devices with a total budget up to 30W (device requires external DC power supply to operate).
• Interfaces: 1x SFP fiber uplink slot and 1x RJ45 Gigabit Ethernet port (PoE-enabled on the copper side).
• Fiber compatibility: Supports both single-mode (SM) and multi-mode (MM) fiber via standard SFP modules (modules not included).
• Enclosure and build: Industrial-grade IP-30 rated metal housing with a compact mini size designed for space-constrained deployments and harsh environments.
• Operating considerations: Fanless, robust, and suitable for a range of temperatures and rugged conditions common in industrial facilities and remote sites.

how to install StarTech.com PoE+ Industrial Fiber to Ethernet Media Converter 30W - SFP to RJ45 - SM/MM Fiber to Gigabit Copper Mini Size IP-30

To maximize reliability and performance, follow these straightforward steps to install your StarTech.com PoE+ Industrial Fiber to Ethernet Media Converter:

1) Plan the placement: Choose a secure, ventilated location away from excessive dust and moisture. The compact, wall-mountable, or rack-adaptable design makes it easy to position near the devices it serves or near the fiber backbone. Ensure the area has access to an appropriate external DC power supply to power the converter itself and support the PoE budget for attached devices if needed.

2) Install the SFP module: Insert a compatible fiber SFP module into the SFP slot according to the module and port orientation. Confirm a snug fit to ensure proper optical alignment and reliable link establishment. If your fiber link requires a specific wavelength, choose the corresponding SFP module accordingly.

3) Connect fiber cable: Run the SM/MM fiber cable from the network side (e.g., a switch or optical transceiver) to the SFP slot on the media converter. Use LC connectors when required and ensure cable management to avoid strain on connectors and ports. Verify that the fiber connectors are clean and free of dust for optimal signal integrity.

4) Attach the copper link: Connect the RJ45 Ethernet port to the target device or switch that will receive the data and, if applicable, PoE power. If your application requires powering a remote device via PoE, ensure that the connected device is PoE-compatible and within the 30W total budget. Use appropriate network cables that meet CAT5e or higher specifications for Gigabit speed.

5) power up and verify: Provide power to the media converter with the appropriate external DC power supply. Once powered, check the status LEDs for link activity on both the fiber uplink and the copper port. Confirm that the PoE indicator shows power delivery to the connected device if PoE is in use. Perform a basic data test by sending traffic from the fiber side to the copper side and vice versa to confirm proper operation.

6) secure and document: Mount the device securely, secure any cables, and document your network topology. Note the SFP module type, fiber type, and PoE requirements for maintenance and future expansions. Regularly inspect the installation to ensure the enclosure remains clean and the connectors remain free of dust and debris.

Frequently asked questions

• What is the PoE+ power budget for this converter? The unit provides PoE+ power with a total budget of up to 30W for connected devices. Powering the converter itself requires an external DC supply; the PoE budget is allocated to the downstream devices connected via the RJ45 port.
• Which fiber types does it support? It supports both single-mode (SM) and multi-mode (MM) fiber through an SFP module. Choose the appropriate SFP module for your distance and fiber backbone requirements.
• Can I use this device outdoors? The enclosure is IP-30 rated, designed for indoor use in industrial environments. For outdoor deployments, provide a protected enclosure or enclosure with additional environmental protection to guard against moisture and dust.
• Do I need to configure the device? The media converter is designed for plug-and-play operation with auto-negotiation. No complex setup is typically required; simply connect your fiber, copper, and power, and it should operate.
• Is the SFP module included? No, SFP modules are not included. You will need to supply a compatible SFP module suited to your fiber distance and type to complete the uplink connection.
• What kind of devices benefit most from this converter? Devices requiring network connectivity over long distances with PoE capability—such as IP cameras, wireless access points, sensors, and industrial controllers—benefit from this solution by extending both data and power to remote locations.