Supermicro SuperServer 6019P-WT Barebone System

The Supermicro WIO serverboard family sets the standard for next‑generation enterprise compute, and the SuperServer 6019P-WT Barebone System brings that vision into a compact 1U chassis. Built for data centers that demand density, reliability, and flexible I/O, this dual‑processor platform is designed to maximize virtualization, database performance, HPC workloads, and storage‑intensive applications. With support for Socket P LGA‑3647 and dual processors, it delivers scalable power while maintaining efficiency and easy management in a compact footprint.

• Dual‑processor powerhouse in a 1U footprint – Designed to accommodate two compatible Socket P LGA‑3647 CPUs, the 6019P-WT delivers impressive compute density for virtualization clusters, database engines, AI inference, and HPC tasks without requiring a large rack footprint.
• Extensible I/O for accelerated workloads – A flexible I/O architecture supports a broad range of PCIe expansion options and high‑speed networking to optimize data movement, accelerate storage access, and enable low‑latency communication between nodes and accelerators.
• Enterprise reliability and remote management – Built for nonstop operation, with options for redundant power, hot‑swap components, and robust remote management (IPMI) to monitor health, perform firmware updates, and troubleshoot without on‑site visits.
• DDR4 ECC memory for data integrity – Supports large memory configurations with DDR4 ECC (RDIMM) to improve data integrity, reduce error rates, and enhance performance for memory‑intensive virtualization and in‑memory databases.
• Flexible storage and scalable growth – The barebone design accepts a variety of drives and backplane configurations, enabling scalable storage solutions that align with evolving workloads and budget requirements while maintaining easy maintenance and upgrades.

Technical Details of Supermicro SuperServer 6019P-WT Barebone System

• Form Factor: 1U rack‑mountable chassis optimized for dense data center deployment
• CPU Support: Dual Socket P LGA‑3647 processors; designed for high‑performance enterprise CPUs and scalable compute
• Memory: DDR4 ECC memory support (RDIMM) with configurations tailored to workload demands and virtualization density
• Storage Options: Flexible drive configurations with support for SATA/SAS interfaces and hot‑swappable bays to minimize downtime during maintenance
• Expansion: Multiple PCIe slots for accelerators, GPUs, NICs, and storage controllers to tailor the system for AI, virtualization, or big data workloads
• Networking: Standard onboard networking with options for high‑speed NIC modules to enable fast intra‑rack and data center uplinks
• Power and Cooling: Redundant power supply options and an efficient cooling design with hot‑swappable fans for easy serviceability
• Management: IPMI 2.0 with remote management capabilities to monitor health, perform remote KVM, and streamline maintenance and firmware updates

how to install Supermicro SuperServer 6019P-WT Barebone System

Follow these general steps to assemble and deploy the 6019P‑WT in your data center:

• Prepare a grounded work area and verify rack alignment, rails, and mounting hardware before unboxing the barebone chassis.
• Install the compatible dual Socket P LGA‑3647 CPUs into their sockets, applying thermal interface material as recommended and attaching the appropriate cooling solution.
• Populate DDR4 ECC memory modules in the recommended channel configuration to achieve optimal memory bandwidth and reliability for your workloads.
• Configure storage by attaching the supported drives or backplane components, connect data cables, and verify proper drive detection in the BIOS/UEFI.
• Install the motherboard assembly into the 1U chassis, secure with the designated standoffs, then connect power, management, and data cables to the rear I/O and backplane connectors.
• Power up the system, enter the BIOS/UEFI to set boot order, CPU features, memory timings, and any virtualization‑related options; update firmware if needed before OS installation.
• Install your operating system or hypervisor, configure networking, and integrate with centralized management tools to enable IPMI monitoring, alerts, and remote access for ongoing maintenance.

Frequently asked questions

• Q: Does the 6019P-WT come with a power supply? A: The 6019P-WT is typically a barebone system and does not include a power supply. Select a compatible redundant power supply pair that meets your workload and redundancy requirements.
• Q: Can I install two CPUs in this barebone? A: Yes. The system is designed to support dual Socket P LGA‑3647 processors to deliver high compute density for virtualization, databases, and HPC tasks.
• Q: What type of memory is supported? A: DDR4 ECC memory (RDIMM) is supported, with configurations optimized for your workload and virtualization needs.
• Q: Is IPMI available for remote management? A: Yes. IPMI 2.0 with remote management capabilities is included to monitor system health, perform remote initialization, and simplify firmware updates.
• Q: What kinds of storage and network options are supported? A: The system supports flexible storage configurations (SATA/SAS backplanes and hot‑swap bays) and can accommodate high‑speed networking modules to meet data center throughput and latency requirements.