Supermicro X10DRD-LTP Server Motherboard – Dual Xeon E5-2600 v3, Intel C612, LGA 2011-v3

Engineered for demanding data-center workloads, virtualization, and high-performance computing, the Supermicro X10DRD-LTP Server Motherboard delivers enterprise-grade reliability and expansive I/O in an Extended ATX form factor. Built around the Intel C612 chipset and Socket LGA 2011-v3, this board is designed to unleash the full potential of the Xeon E5 family, enabling robust multi-processor configurations, superior memory bandwidth, and scalable expansion for modern server environments. Whether you’re building a virtualization host, a dense compute node, or a database powerhouse, the X10DRD-LTP blends advanced engineering with practical features that keep workloads responsive and operations simple.

• Dual-processor performance – Supports two Intel Xeon E5-2600 v3 family processors, delivering powerful concurrent processing that drives virtualization, database, and HPC workloads with responsiveness and efficiency.
• Intel C612 chipset for reliability and I/O – Engineered to optimize Haswell-based Xeon architectures, the C612 chipset provides robust I/O integration, efficient data paths, and dependable platform stability under heavy workloads.
• Extensive memory capabilities – Designed to support ECC DDR4 memory with substantial capacity, enabling large-scale virtualization, memory-intensive databases, and memory-hungry applications while preserving data integrity through error correction.
• Rich expansion and connectivity – A generous array of PCIe 3.0 expansion slots, storage interfaces, and networking options allows you to tailor the board to GPUs, RAID controllers, high-speed NICs, and storage controllers for high-throughput workloads.
• Comprehensive management and reliability – Integrated IPMI 2.0 with remote management, health monitoring, and platform management features that simplify administration, maintenance, and rapid recovery in data-center environments.

Technical Details of Supermicro X10DRD-LTP

• Chipset: Intel C612
• Socket: LGA 2011-v3
• Form Factor: Extended ATX (E-ATX)
• CPU Support: Dual Intel Xeon E5-2600 v3 family processors
• Memory: Supports ECC DDR4 memory with scalable capacity (exact totals vary by configuration)
• Expansion: Multiple PCIe 3.0 slots for GPUs, storage controllers, NICs, and other expansion cards
• Storage Interfaces: SATA 6Gb/s and SAS options, with support for RAID controller configurations
• Management: IPMI 2.0 with dedicated management port for remote access and monitoring
• Networking: Integrated network options with support for additional NICs and multi-port configurations
• Power Delivery: Robust VRM design to handle dual-CPU thermal and power requirements

How to install Supermicro X10DRD-LTP

• Prepare your chassis and workspace by ensuring there is sufficient clearance for an Extended ATX motherboard and adequate airflow for cooling. Verify the chassis supports dual-CPU layouts and has the correct standoff pattern for the motherboard.
• Install the CPU heatsinks and thermal interface material according to the manufacturer’s guidelines. For dual-processor setups, install the first processor into Socket 1 and re-check seating, then install the second processor into Socket 2 if your configuration requires it. Ensure proper cooling and clearance around the CPU retainers.
• Insert ECC DDR4 memory modules into the correct DIMM slots according to the motherboard’s memory population guidelines. Start with the minimum configuration and gradually populate the slots to achieve the desired memory footprint while maintaining proper channel interleaving for optimal performance.
• Attach the motherboard to the chassis with appropriate standoffs and screws. Route power and data cables carefully to avoid blocking fans or obstructing component access. Connect the 24-pin ATX power connector, 8-pin (and additional) CPU power connectors, and any PCIe power cables required by high-performance expansion cards.
• Install PCIe expansion cards, storage controllers, RAID controllers, or high-speed NICs into the available PCIe slots. Ensure slots are properly seated and secured, and verify that cooling airflow remains unobstructed around expansions.
• Connect storage devices (SATA/SAS) and configure any onboard RAID or HBA controllers according to your storage plan. If you’re using a RAID controller, install its drivers and arrange disk sets as needed for your deployment.
• Power up the system and enter the BIOS/UEFI to configure fundamental settings: CPU and memory timing, PCIe slot configurations, boot order, and hyper-threading options. Enable any required virtualization features (SLAT, VT-d, etc.) and set the system to your preferred operating mode (UEFI boot, legacy boot, etc.).
• Enable IPMI and configure remote management for ongoing health monitoring and remote administration. Update firmware and drivers to the latest versions through the vendor’s utility or support portal to ensure stability and security.
• Install your chosen operating system and virtualization software. For virtualization workloads, consider optimizing NUMA settings, memory allocation, and I/O topology to maximize performance and resource efficiency across the dual-CPU configuration.

Frequently asked questions

• What CPUs are supported? The X10DRD-LTP is designed for dual Intel Xeon E5-2600 v3 family processors (Haswell-based architectures). Always consult the official product page for latest compatibility notes and BIOS requirements.
• What memory types does it support? It supports ECC DDR4 memory modules with enterprise-grade reliability. Memory capacity and configuration depend on processor model and BIOS/firmware limits.
• How many PCIe slots are available? The board includes multiple PCIe 3.0 expansion slots to accommodate GPUs, storage controllers, NICs, and other accelerators, enabling high-throughput I/O for demanding workloads.
• Does it include remote management? Yes. It features IPMI 2.0 with a dedicated management port to facilitate remote monitoring, power control, and system health management from anywhere in the data center.
• Is this motherboard suitable for virtualization? Absolutely. With dual Xeon processors, abundant memory support, and flexible I/O expansion, the X10DRD-LTP is well-suited for virtualization hosts, mixed workload servers, and hyper-converged deployments.
• What kind of storage options are supported? The motherboard provides SATA and SAS connections with compatibility for RAID controllers and various storage configurations, making it adaptable for traditional HDD arrays or modern SSD ensembles.

Designed to deliver reliability and scalability, the Supermicro X10DRD-LTP stands out in environments where uptime, performance, and expandability matter. The combination of dual Xeon support, C612 chipset, and a broad set of I/O options makes this motherboard a strong foundation for virtualization platforms, data-intensive applications, and compute-heavy workloads. The Extended ATX form factor provides ample real estate to host robust VRMs, cooling solutions, and a tiered array of expansion cards, ensuring you can tailor the system to your exact requirements. From enterprise data centers to campus-scale deployments, this motherboard is built for reliability, long-term support, and efficient management in demanding production environments.