Total Micro 32GB DDR4 ECC Registered Memory Module

Designed for server-grade performance and reliability, the Total Micro 32GB DDR4 ECC Registered Memory Module delivers a robust memory upgrade for data centers, enterprise applications, and virtualization environments. This 32 GB module comes in a single DIMM configuration (1 x 32GB), simplifying upgrades by increasing capacity without changing existing hardware layouts. Engineered for continuous operation, it leverages DDR4-2666 (PC4-21300) speeds to boost memory bandwidth and reduce latency, helping applications access data faster and more efficiently. With a 1.20 V operating voltage, this module balances performance with energy efficiency—an essential consideration for dense server deployments and power-conscious data centers. The ECC feature continuously monitors and corrects single-bit memory errors, while the registered design (RDIMM) buffers signals to the memory controller, improving signal integrity in high-density configurations. This combination of ECC and Registered memory is specifically tailored for reliability, making it a strong choice for servers handling mission-critical workloads, large databases, virtualization hosts, and memory-intensive applications. Whether you are upgrading a rack-mounted server, blade server, or tower server that supports DDR4 RDIMM modules, this 32GB module is built to deliver consistent, dependable performance under demanding workloads. Pairing this module with compatible processors and motherboards helps optimize memory interleaving across channels, enhancing throughput and stability across enterprise environments. In short, Total Micro’s RAM module is a practical, future-ready upgrade that supports growing memory demands while maintaining data integrity and system uptime.

• High-capacity 32GB in a single DDR4 RDIMM module to maximize server memory without compromising slot availability.
• DDR4-2666 (PC4-21300) speed with CL15 timing for balanced performance and responsiveness in demanding workloads.
• ECC (Error-Correcting Code) memory for automatic detection and correction of single-bit errors, enhancing data integrity and uptime.
• Registered (RDIMM) design that buffers memory signals, improving reliability in high-density configurations common in servers.
• 288-pin DIMM form factor compatible with a wide range of server motherboards and Xeon/EPYC-class platforms that support DDR4 RDIMM memory.

Technical Details of Total Micro 32GB DDR4 SDRAM Memory Module

• Capacity: 32GB (1 x 32GB)
• Memory Type: DDR4 SDRAM
• Speed: DDR4-2666 (PC4-21300)
• CAS Latency: CL15
• Voltage: 1.20V
• ECC: Yes
• Registered: Yes
• Module Type: 288-pin DIMM
• Form Factor: RDIMM (Registered DIMM) for servers

How to Install Total Micro 32GB DDR4 SDRAM Memory Module

• Power down the server completely, unplug from power, and disconnect all cables. If the device is in a rack, carefully remove it following your data center procedures.
• Ground yourself to prevent static discharge. Use an anti-static wrist strap or touch a metal surface to discharge any built-up static electricity before handling memory.
• Open the server chassis or memory access panel to reveal the DIMM slots. Identify an empty DDR4 RDIMM slot that matches the 288-pin configuration.
• Handle the memory module by the edges. Do not touch the gold-plated contacts or the memory chips. Align the notch on the module with the key in the slot to ensure correct orientation.
• Gently insert the module straight into the slot. Apply even pressure on both ends of the module until the latches on the sides click into place, securing the DIMM.
• Repeat only if you are adding more modules, ensuring they are seated properly and that the server supports multi-slot configurations without conflicting with existing memory.
• Once seated, replace the chassis cover, reconnect all cables, and reinsert the server into the rack if applicable.
• Power up the server and enter the BIOS/UEFI to verify that the new memory is detected. Run a memory test or diagnostic tool to confirm stability and proper operating speed.
• If the memory is not detected, re-seat the DIMM, check slot compatibility, and ensure the BIOS is up to date. Refer to your server vendor’s compatibility list for recommended memory configurations.

Frequently Asked Questions

• Q: What type of memory is this? A: This is a 32GB DDR4 SDRAM memory module in a Registered ECC RDIMM form factor, designed for server use and reliability in high-density configurations.
• Q: What does ECC mean in this module? A: ECC stands for Error-Correcting Code. It detects and corrects single-bit memory errors to improve data integrity and reduce the risk of memory-related downtime.
• Q: What does Registered mean? A: Registered memory includes a buffer (register) between the SDRAM modules and the memory controller, which helps stabilize high-density memory configurations and improves signal integrity in servers.
• Q: Can I mix ECC with non-ECC memory? A: It is generally not recommended to mix ECC with non-ECC memory, as doing so can disable ECC functionality and compromise reliability. Use ECC memory consistently in servers that require error correction.
• Q: What workloads benefit most from a 32GB DDR4 RDIMM? A: Virtualization hosts, large databases, in-memory caching, ERP and CRM systems, analytics workloads, and other memory-intensive server applications benefit from the increased capacity and reliability of 32GB RDIMM modules.