Transcend 16GB DDR3L ECC-DIMM Memory Module

Upgrade your desktop or workstation with the reliability and efficiency of Transcend 16GB DDR3L ECC-DIMM memory. This module is engineered to meet exacting specifications, using premium-grade chips and materials that endure strenuous laboratory testing to deliver stable performance under heavy workloads. With ECC (Error-Correcting Code) technology, this memory module actively detects and corrects single-bit errors, safeguarding data integrity in mission-critical applications. Built for long life and maximum durability, Transcend’s DDR3L low-voltage DIMMs are designed to minimize power consumption while maximizing system stability, making them an ideal choice for professionals who demand consistent reliability from their memory hardware.

• Unparalleled data integrity through ECC: The Transcend DDR3L ECC-DIMM actively detects and corrects single-bit memory errors in real time, dramatically reducing the risk of data corruption and system crashes during intensive multitasking, virtualization, or memory-hungry workloads. This feature is especially valuable for professionals running databases, servers, CAD applications, or large-scale simulations where reliability is non-negotiable.
• Low-voltage efficiency for cooler, greener computing: Operating at 1.35V, DDR3L memory helps reduce overall power usage and heat generation compared to standard DDR3 modules. This efficiency translates into cooler system temperatures, quieter cooling solutions, and lower energy bills—benefits that are particularly meaningful for workstations that run 24/7.
• Ample capacity for demanding workloads: With 16GB of memory per module, this Transcend DIMM provides abundant headroom for professional-grade software, virtualization, multimedia editing, scientific computing, and large-scale spreadsheets. The ample RAM capacity enables smoother multitasking and faster data processing, allowing you to work with larger datasets, more tabs, and heavier applications without frequent paging to disk.
• Rigorous build quality for dependable performance: Transcend memory modules are constructed from high-quality components and subject to stringent laboratory testing to ensure consistent performance, stability, and longevity. The combination of premium ICs, robust PCB design, and meticulous quality control translates to fewer defects, longer service life, and dependable operation in demanding environments.
• Broad compatibility for desktops and workstations: Designed for systems that support DDR3L ECC-DIMM, this 16GB module fits a wide range of desktops and workstations. It’s an ideal upgrade for professional workstations, engineering rigs, or servers that require error-correcting memory to protect critical data and maintain uptime.

Technical Details of Transcend 16GB DDR3L SDRAM Memory Module

• Capacity: 16GB per module (1 x 16GB) — scalable for configurations that require additional memory capacity for heavy workloads and multi-application environments.
• Memory Type: DDR3L SDRAM — a low-voltage, industry-standard memory technology that combines speed with efficiency for better thermal and power management.
• ECC: Yes — Error-Correcting Code memory ensures data integrity by detecting and correcting single-bit errors, which mitigates the risk of data corruption during processing.
• Form Factor: 240-pin DIMM (Unbuffered ECC-DIMM) — designed for standard desktop and workstation memory slots that require ECC functionality.
• Voltage: 1.35V (DDR3L operation) — optimized for lower power consumption while maintaining dependable performance.
• Operating Frequency: Supports standard DDR3L speeds as supported by the system (typical ranges include 1333 MHz and 1600 MHz variants); actual speed depends on motherboard and CPU compatibility.
• Timing/Latency: Varies by module variant; consult your motherboard's memory support list for the exact timing specifications and to ensure optimal compatibility with your setup.

How to install Transcend 16GB DDR3L ECC-DIMM Memory Module

Installing this memory module is straightforward on compatible systems. Follow these steps to ensure proper seating and reliable operation:

1) Power down the computer and unplug the power cord. Ground yourself to discharge any static electricity before handling memory components.

2) Open the computer case and locate the memory slots. Identify available 240-pin DDR3L ECC-DIMM slots that are designed to accept unbuffered ECC modules. If you are upgrading, remove any existing memory modules in the desired slots by pressing the locking clips outward until the module seats freely.

3) Align the notch on the module with the key in the memory slot. The module should slide in smoothly with even pressure; never force it. Once properly aligned, press down evenly on both ends of the module until the locking clips snap into place, securing the module.

4) Re-seat and verify: Double-check that the module is fully seated and the locking clips are firmly engaged. If you installed more than one module, ensure all modules are properly seated in their respective slots, and consult the motherboard manual for the correct population order if required by your configuration.

5) Close the case, reconnect power, and boot the system. Enter the BIOS/UEFI setup to confirm that the memory is recognized at the correct capacity and speed. If prompted, enable any ECC-related settings or XMP profiles supported by your motherboard to optimize performance. Save changes and exit, then allow the operating system to boot and run a memory diagnostic to verify stability and data integrity.

6) Validate stability under load: After booting into the operating system, run a memory stress test or a professional benchmarking suite to confirm ECC functionality, stability, and performance with your specific workload. Observing stable temperatures and consistent performance will help ensure a reliable upgrade that delivers real-world benefits.

Note: If you encounter compatibility issues, verify that your motherboard and processor support DDR3L ECC memory and that the memory slot population follows the manufacturer’s guidance. ECC functions are often dependent on motherboard and BIOS support; consult the motherboard’s Qualified Memory Vendor List (QVL) or memory compatibility chart for confirmation before purchasing.

Frequently asked questions

• Q: Is this memory module compatible with all desktops? A: This module is designed for systems that support DDR3L ECC-DIMM in a 240-pin slot. While many desktops and workstations support this standard, always check your motherboard’s memory compatibility list and ensure ECC support is enabled in BIOS/UEFI before purchase.
• Q: What is the advantage of ECC memory in a workstation? A: ECC memory corrects single-bit errors on the fly, reducing the risk of system crashes and data corruption during long-running calculations, large data processing tasks, or server-like workloads. This is especially valuable for professional environments where uptime and data integrity matter.
• Q: Can I mix ECC and non-ECC memory in the same system? A: Mixing ECC and non-ECC memory is generally not recommended and can disable ECC features in some motherboards. For best results, use ECC modules exclusively in motherboard slots that support ECC and ensure compatibility with your CPU and BIOS settings.
• Q: What speed will this module run at in my system? A: The actual memory speed depends on your motherboard and CPU. DDR3L ECC-DIMM modules commonly operate at 1333 MHz or 1600 MHz in many configurations; consult your motherboard’s memory support list to determine the exact supported speed and any required BIOS settings.