Transcend MTE652T 512GB NVMe M.2 SSD — PCIe Gen3 x4, NVMe 1.3

Experience a new level of speed and responsiveness with Transcend’s MTE652T 512GB NVMe M.2 solid-state drive. Built for modern systems, this drive leverages the PCIe Gen3 x4 interface and NVMe 1.3 specification to deliver dramatically faster boot times, snappier application launches, and smoother multitasking. Its 3D NAND architecture with 96-layer stacks provides a balance of performance, durability, and efficiency, making it an ideal upgrade for gaming rigs, creator workstations, and everyday laptops and desktops where speed matters most.

• The MTE652T uses a PCIe Gen3 x4 interface paired with NVMe 1.3 to unlock significantly higher bandwidth and lower latency compared with traditional SATA SSDs, translating to faster OS boots, quicker game level loads, and smoother texture streaming during play. This combination is optimized for heavy multitasking and demanding workloads, helping your system feel responsive even when pushing multiple apps at once.
• Powered by state-of-the-art 3D NAND technology with 96-layer stacks, the drive delivers durable performance and reliable wear characteristics. The advanced memory structure supports strong data integrity, efficient write amplification control, and extended endurance for long-term use in laptops, desktops, and compact workstations.
• Compact M.2 2280 form factor ensures broad compatibility across a wide range of motherboards and laptops. Its plug-and-play installation makes it a straightforward upgrade for most systems, allowing you to replace an existing boot drive or add high-speed storage without changing your setup footprint.
• Built with data integrity in mind, the MTE652T supports essential NVMe features such as TRIM, NCQ, and S.M.A.R.T. monitoring. These capabilities help maintain peak performance over time, protect against unexpected data loss, and enable proactive health tracking through compatible software utilities.
• Perfect for a diverse set of use cases—from gaming and content creation to everyday productivity—the MTE652T accelerates large file transfers, accelerates software development workflows, and reduces load times for open-world titles. Its energy-efficient design also helps extend battery life in laptops while delivering desktop-class performance in a compact package.

Technical Details of Transcend MTE652T

• Capacity: 512 GB
• Form Factor: M.2 2280
• Interface: PCIe Gen3 x4
• NVMe: NVMe 1.3 compliant
• 3D NAND: 96-layer stacked NAND
• Compatibility: Compatible with Windows, macOS, and Linux environments
• Memory Features: Supports TRIM, NCQ, and S.M.A.R.T. for drive health and performance maintenance
• Performance Characteristics: Designed for high throughput and low latency typical of NVMe 1.3-enabled drives
• Use Case: Suitable for OS installation, game storage, and fast data access on modern laptops and desktops

How to install Transcend MTE652T

• Power down your computer or laptop and unplug the power source. If you are upgrading a laptop, ensure you are working on a static-free surface and remove the battery if applicable and safe to do so.
• Open the system case (or service panel) and locate an available M.2 slot that supports PCIe NVMe drives. The MTE652T uses the 2280 width, so ensure the slot accepts an M.2 2280 form factor.
• Gently insert the MTE652T module into the M.2 socket at a slight angle (about 30 degrees) and press down until it lies flat against the motherboard. Secure the drive with the appropriate mounting screw in the standoff provided by the motherboard or case.
• Reconnect power, boot the system, and enter BIOS/UEFI. Verify that the NVMe drive is detected and, if you are planning to use it as your boot drive, set it as the primary boot device. Save and exit BIOS to continue the OS boot process.
• Once the system boots, initialize and format the new drive in your operating system. In Windows, open Disk Management to initialize the disk and format it (NTFS or exFAT for general use; you can install the OS on it if you plan to boot from this drive). In macOS or Linux, use the respective disk utility tools to prepare the drive for use. After formatting, you can move data, install applications, or install an operating system onto the new NVMe drive as desired.

Frequently asked questions

• Q: What form factor and interface does the Transcend MTE652T use?

  A: It uses the M.2 2280 form factor with a PCIe Gen3 x4 interface and NVMe 1.3 protocol for fast, reliable storage.

• Q: What capacity is available for this model?

  A: The model shown is a 512 GB drive, offering a balance between cost and capacity for OS, apps, and games. Transcend also offers other capacity options in the MTE652T family.

• Q: Is this drive suitable for gaming and OS boot drives?

  A: Yes. Its NVMe performance reduces game load times, accelerates OS boot, and improves overall system responsiveness compared with SATA SSDs or HDDs.

• Q: Does it support data integrity and drive health features?

  A: The drive supports standard NVMe features such as TRIM, S.M.A.R.T., and NCQ, which help maintain performance and monitor drive health over time.

• Q: How do I install the Transcend MTE652T?

  A: Follow the installation steps in the “How to install” section above: power down, insert into the M.2 slot, secure with a screw, boot to BIOS/OS, and format the drive as needed.