Transition Networks TN-SFP-LX8-C35 CWDM SFP (mini-GBIC) Transceiver

Discover a reliable, scalable CWDM SFP transceiver designed to power next‑gen enterprise, data‑center, and metropolitan networks. The TN-SFP-LX8-C35 CWDM SFP (mini-GBIC) Transceiver from Transition Networks is built for seamless interoperability, enabling flexible deployments across multiple vendor platforms thanks to strict Multi-Sourcing Agreement (MSA) compliance. This module combines industry‑standard 1000BASE-LX CWDM performance with the convenience of a hot‑swappable, plug‑and‑play form factor, delivering a cost‑effective solution for long‑haul and campus connections over single‑mode fiber.

• MSA-compliant and highly interoperable: Fully adheres to MSA specifications, ensuring broad compatibility with a wide range of SFP ports across different vendors. This minimizes vendor lock‑in and simplifies upgrade paths for growing networks.
• CWDM LX8-C35 channel family for scalable light paths: Part of Transition Networks’ CWDM portfolio, the LX8-C35 family enables multiple light channels on a single fiber pair, improving bandwidth efficiency and lowering fiber costs while supporting future expansion.
• 1 Gbps data rate with single‑mode fiber support: Designed for 1000BASE-LX CWDM links, delivering stable, high‑quality performance for backbone connections, edge links, and data‑center interconnects.
• Standard LC duplex connector and hot‑swappable design: Fits the familiar SFP footprint with LC duplex connectors, enabling straightforward installation and rapid replacement without impacting adjacent ports in many environments.
• Diagnostics and reliability for proactive management: Includes Digital Diagnostics Monitoring (DDM/DOM) capabilities to monitor optical power, temperature, and link health, helping ensure optimal performance and reducing downtime.

Technical Details of Transition Networks TN-SFP-LX8-C35 CWDM SFP (mini-GBIC) Transceiver

• Form factor: SFP (mini-GBIC) transceiver
• Model: TN-SFP-LX8-C35
• Compliance: MSA-compliant; hot-swappable
• Interface: 1000BASE-LX CWDM SFP
• Wavelength/channel family: CWDM wavelengths within the LX8-C35 family for flexible channel planning and efficient spectrum use
• Data rate: 1 Gbps typical (1000BASE-LXCWDM)
• Connector: LC duplex
• Fiber type: Single‑mode fiber recommended for optimal performance and distance
• Diagnostics: DOM/DDM support for real‑time monitoring of optical power, temperature, and link status
• Reliability and warranty: Designed for enterprise environments with standard vendor warranty and replacement options available through Transition Networks channels

How to install Transition Networks TN-SFP-LX8-C35 CWDM SFP (mini-GBIC) Transceiver

Installations are designed to be straightforward while preserving link integrity and performance. Follow these steps to deploy the TN-SFP-LX8-C35 in compatible SFP ports:

• Power down the chassis or switch port if required by your operator guidelines, then locate an available SFP slot.
• Remove the protective caps from both the transceiver and the fiber patch cord; ensure the fiber ends are clean and free of dust or debris.
• Insert the TN-SFP-LX8-C35 into the SFP slot until it seats firmly with a definitive click; confirm the module is fully seated and locked in place.
• Connect a single‑mode patch cord with LC duplex connectors to the transceiver, matching TX to RX on the corresponding device. Take care to maintain cleanliness and proper polarity.
• Power up the equipment and verify link status through the device’s management interface. Use any available DOM/Diagnostics readouts to confirm optical power levels and link health, adjusting as needed for optimal performance.

Frequently asked questions

• Q: Is this module compatible with non-Transition Networks devices? A: Yes. As an MSA-compliant SFP, the TN-SFP-LX8-C35 is designed to work with other MSA-compliant SFP ports that support 1000BASE-LX CWDM interfaces.
• Q: What kind of fiber is required? A: This transceiver is designed for single‑mode fiber and uses LC duplex connectors. Ensure your fiber path is appropriate for CWDM wavelengths and that connectors are clean for best results.
• Q: What data rate does it support? A: The TN-SFP-LX8-C35 supports 1 Gbps typical data rate associated with 1000BASE-LX CWDM links.
• Q: Does it support diagnostics? A: Yes. The module includes Digital Diagnostics Monitoring (DDM/DOM) for real-time visibility into optical power, temperature, voltage, and link status.
• Q: How does the MSA compliance benefit my network? A: MSA compliance ensures broader interoperability across devices from multiple vendors, simplifying procurement, inventory management, and future upgrades while reducing the risk of compatibility gaps.