TRENDnet 18-Port Multi-Gig Web Smart Switch, TEG-3182WS – 16 x 2.5Gb Ports, 2 x 10Gb SFP+ Ports, NDAA TAA Compliant

Discover a scalable, enterprise-grade solution designed to power modern SMB networks. TRENDnet’s 18-Port Multi-Gig Web Smart Switch, model TEG-3182WS, delivers high-speed local connectivity with sixteen 2.5 Gigabit Ethernet ports and two 10 Gb SFP+ uplinks, all managed through a user-friendly web interface. Built for IPv6 readiness, remote cloud management, and robust traffic control, this switch blends advanced L2+ features with easy operation, making it a standout choice for dense workgroups, servers, and storage devices. The TEG-3182WS is rack-mountable and NDAA/TAA compliant, offering dependable performance with Lifetime Protection for peace of mind as your network grows.

• High-speed port configuration: 16 x 2.5GbE RJ-45 ports plus 2 x 10Gb SFP+ uplink ports deliver flexible, high-performance connectivity for desktops, servers, and storage devices.
• Advanced L2+ traffic management: Benefit from VLAN support, QoS, ACLs, IGMP/MLD snooping, and link aggregation to optimize network performance and security across your SMB environment.
• Web-based management with remote cloud access: Intuitive, centralized control via a browser, plus remote cloud management for monitoring and configuration from anywhere in your organization.
• IPv6-ready and future-proof: Designed to operate in dual-stack (IPv4/IPv6) networks, enabling smooth transition and ongoing compatibility with modern devices and services.
• Reliability and compliance: NDAA/TAA compliant with Lifetime Protection and a rack-mountable chassis, crafted to deliver dependable performance in professional deployments.

Technical Details of TRENDnet 18-Port Multi-Gig Web Smart Switch, TEG-3182WS

• Model: TEG-3182WS
• Ports: 16 x 2.5G RJ-45 ports; 2 x 10G SFP+ ports (uplinks)
• Management interfaces: Web-based graphical user interface; supports remote cloud management for off-site monitoring and configuration
• switching features: L2+ capabilities including VLANs, QoS, ACLs, port-based VLAN, IGMP/MLD snooping, Link Aggregation (LACP), and security controls
• IPv6 readiness: IPv6-ready with dual-stack operation to support future networking needs
• Physical design: Rack-mountable 1U form factor for enterprise rack installations
• Compliance and protection: NDAA/TAA compliant with Lifetime Protection
• Target use case: Ideal for SMB environments requiring high-speed uplinks, centralized management, and scalable Layer 2+ features
• Power and efficiency: Designed for efficient operation in small to mid-size offices with reliable power delivery to connected devices

how to install TRENDnet 18-Port Multi-Gig Web Smart Switch

• Unbox and verify: Confirm all items are present and inspect the switch for any transport damage. Typical contents include the switch, mounting hardware, and a quick start guide.
• Choose the installation method: Mount the switch in a standard 19-inch rack using the included mounting ears, or place it on a stable, ventilated surface as required.
• Power and cabling: Connect the power cord to a suitable outlet. Run network cables to the 16 x 2.5GbE ports for end devices and servers, and connect uplinks to your upstream switch, router, or core network via the 2 x 10Gb SFP+ ports using compatible fiber or DAC modules.
• Initial access and configuration: Open a web browser and access the switch’s management interface (refer to the quick start guide for default IP and login instructions). Change default credentials on first login to secure the device.
• Set up basic network policies: Create VLANs to segment traffic, configure QoS for critical applications, enable LACP on link-bagged ports, and apply ACLs as needed. Enable IPv6 addressing and set up dual-stack routing if your network requires IPv6 support.
• Enable remote cloud management: If your policy uses centralized management, enroll the switch in your TRENDnet remote management console to monitor status, push configurations, and receive alerts from a single pane of glass.
• Save and test: Save your configuration, reconnect affected devices, and verify connectivity, performance, and policy enforcement. Monitor for any anomalies and adjust as necessary.

Frequently asked questions

• Q: What is the port layout of the TRENDnet TEG-3182WS?
  A: It features 16 x 2.5G RJ-45 ports for standard access connectivity and 2 x 10Gb SFP+ ports for high-speed uplinks/upstream connections.
• Q: Is the switch IPv6-ready?
  A: Yes. The device is IPv6-ready and supports dual-stack operation to accommodate both IPv4 and IPv6 networks.
• Q: Can I manage this switch remotely?
  A: Yes. The switch supports remote cloud management in addition to its web-based local management interface, enabling centralized control across multiple sites.
• Q: Is the TRENDnet TEG-3182WS NDAA/TAA compliant?
  A: Yes. It complies with NDAA and TAA requirements, aligning with government procurement standards.
• Q: What warranty does this switch come with?
  A: TRENDnet provides Lifetime Protection for this model, delivering long-term coverage and assurance for your investment.
• Q: Is this switch suitable for SMB networks?
  A: Absolutely. With 16 high-speed 2.5G ports, 2 x 10G uplinks, robust L2+ features, and cloud management, it’s designed to meet the needs of modern SMB environments.