TRENDnet 2-Port Gigabit PoE++ Extender TPE-BE200

Meet the TRENDnet TPE-BE200, a compact, powerhouse solution designed to simplify powering and networking remote devices. This 2-port Gigabit PoE++ extender brings data and power to remote IP cameras, wireless access points, and other PoE-enabled gear over standard Ethernet cabling. Built for flexible deployments, it extends the reach of your PoE network without the need for extra power outlets at the remote site. With a robust design, the TPE-BE200 supports long-distance installations, enables scalable daisy chaining, and preserves full Gigabit performance across all ports. It is the ideal choice for retail, office campuses, schools, and security systems where convenience, reliability, and performance matter.

• Powerful PoE++ extension with dual outputs: The unit features 1 x PoE++ input port and 2 x Gigabit PoE output ports, enabling you to supply both data and power to remote devices along the same Ethernet cable. This simplifies wiring, reduces clutter, and ensures that critical devices stay powered without continuous plug-in power sources at remote locations.
• Extended reach for wired deployments: Start with a standard 100-meter (328 ft) extension and push the network farther, up to 200 meters (656 ft) in practical deployments with the right cabling and surrounding environment. This capability makes it perfect for cameras mounted along building perimeters, long corridors, or outdoor-adjacent locations where power outlets aren’t readily available.
• Daisy chain up to four units for total coverage up to 500 meters: Build a scalable PoE network by connecting additional TPE-BE200 extenders in a daisy-chain configuration. With up to four extenders in the chain, you can reach distant devices across large facilities or campuses while maintaining PoE power delivery and Gigabit data throughput.
• Gigabit performance on every port: Each port supports Gigabit Ethernet, preserving high-speed data transmission for bandwidth-intensive devices such as high-resolution security cameras, VoIP phones, and wireless access points. Enjoy smooth video streams, rapid device provisioning, and reliable user experiences across the network.
• Compact, durable design with flexible placement: The TPE-BE200 is designed for versatile deployment, whether mounted on a wall or placed on a shelf. Its black enclosure blends into most environments, and its simple, plug-and-play concept minimizes setup time while delivering dependable PoE extension for demanding setups.

Technical Details of TRENDnet TPE-BE200

• Ports: 1 x Gigabit PoE++ In Port, 2 x Gigabit PoE Out Ports (RJ-45)
• Connectivity: 2 x 10/100/1000 Mbps Ethernet ports for data; PoE++ input and PoE outputs for power and data delivery
• Extension range: 100 m (328 ft) baseline; up to 200 m (656 ft) in extended deployments
• Daisy chain capability: Up to 4 units in a chain for up to 500 m (1640 ft) total reach
• Power delivery: PoE++ input supports receiving power to drive the extender and downstream PoE devices via the two Ethernet outputs
• Form factor and color: Compact black enclosure designed for indoor use with flexible placement options

how to install TRENDnet TPE-BE200

Installing the TRENDnet TPE-BE200 is straightforward and designed for quick deployment without complex configuration. Follow these steps to connect and power your PoE-enabled devices over extended distances:

Step 1 — Plan your layout: Identify the PoE source (PoE switch or injector) and determine where your remote devices will be located. Ensure the chosen path between the PoE source and the devices has suitable Ethernet cabling (Cat5e/Cat6 or better) and that the cable length fits within the 100 m baseline or 200 m extended reach guidelines.

Step 2 — Connect the PoE input: Use a standard RJ-45 Ethernet cable to connect the In port of the TPE-BE200 to your PoE source. The PoE++ input will carry both power and data to the extender and, subsequently, to connected devices.

Step 3 — connect PoE outputs to devices: Plug the two PoE-enabled devices (such as an IP camera and a wireless access point) into the two PoE Out ports. Each port will deliver data and power to its connected device, enabling a clean, single-cable installation.

Step 4 — extend and daisy chain as needed: If you need to reach devices farther away, run standard Ethernet cables from the Out ports to nearby extenders in a daisy-chain configuration. You can add up to three additional extenders (for a total of four units in the chain) to cover larger areas up to 500 meters total reach. Ensure connections are secure and cables are properly routed to avoid interference.

Step 5 — verify operation and monitor: After wiring, confirm that the connected devices power on and that data links are active. Use the Link/Activity indicators on the units as a quick health check. Position the extenders in a suitable location that minimizes exposure to extreme temperatures or moisture and ensures stable performance.

Step 6 — cabling best practices: Use shielded or unshielded Ethernet cables that meet the required category (Cat5e/Cat6 or better) for the distances involved. For longer runs, consider higher quality cables to maintain signal integrity and PoE efficiency.

Step 7 — maintenance and future expansion: As your network grows, you can add more PoE devices or expand the daisy chain by adding additional TRENDnet extenders. Keep firmware up to date where applicable, and periodically inspect connections to ensure long-term reliability.

Frequently asked questions

Q: What devices can be powered by the TRENDnet TPE-BE200?
A: The TPE-BE200 is designed to power PoE-enabled devices such as IP cameras, wireless access points, VoIP phones, and other compatible network devices through its two PoE Out ports, while receiving data and power from a PoE source via the In port.

Q: How far can I extend using the TPE-BE200?
A: The extender supports a baseline reach of 100 meters (328 feet). With proper cabling and setup, you can extend up to 200 meters (656 feet). Additionally, you can daisy-chain up to four units to achieve a total reach of up to 500 meters (1640 feet).

Q: Do I need an external power adapter for the TPE-BE200?
A: No separate power adapter is required for the extender itself. It receives power through the PoE input port from your PoE switch or injector, and then powers the connected devices through the PoE Out ports. This simplifies installation and reduces clutter at remote sites.

Q: Is the TPE-BE200 suitable for indoor use?
A: Yes. The TPE-BE200 is designed for indoor deployments where a compact, unobtrusive form factor is beneficial. Ensure it is placed in a location with adequate ventilation and away from excessive moisture or harsh environmental conditions.

Q: Can I mix devices from different vendors in the same PoE chain?
A: In most cases, yes. PoE extenders typically operate on standard IEEE PoE power delivery over RJ-45 connections, allowing devices from different vendors to receive power and data. Always verify device compatibility with your specific PoE standards (PoE, PoE+, PoE++ where applicable) and ensure that the total power budget across the chain is adequate for all connected devices.