TRENDnet TPE-TG50g: 5-Port Gigabit PoE+ Switch

Meet the TRENDnet TPE-TG50g, a compact 5-Port Gigabit PoE+ switch engineered to streamline network deployments where power over Ethernet is essential. With a total PoE budget of 31W, this switch powers IP cameras, wireless access points, and other PoE-enabled devices directly through the Ethernet cable, reducing cable clutter and eliminating the need for multiple power adapters. Designed for small offices, retail environments, or home surveillance setups, the TPE-TG50g delivers reliable data transfer and efficient device powering in a single, space-saving unit. Its robust build quality, combined with TRENDnet’s reputation for dependable networking gear, makes it a smart choice for anyone aiming to deploy a scalable, cost-effective PoE solution without sacrificing performance.

• Power and data over a single cable with a 31W PoE budget. The TRENDnet TPE-TG50g provides four PoE+ ports that deliver power to compatible devices while simultaneously handling data traffic. This makes it ideal for powering IP cameras, wireless access points, or VoIP phones across a small office or home environment. With IEEE 802.3af/at PoE standards, you can deploy power-hungry devices without worrying about separate power supplies, simplifying installation and reducing cable management challenges. The total PoE budget is allocated across the connected devices, so you can mix and match uplink devices to maximize efficiency and uptime where it matters most.
• 10 Gbps switching capacity for fast, reliable performance. Despite its compact form factor, the TPE-TG50g delivers a non-blocking 10 Gbps switching capacity, ensuring rapid data forwarding and low latency for bandwidth-intensive applications. This is particularly beneficial when streaming high-definition surveillance footage or supporting multiple PoE devices simultaneously. With this level of throughput, you’ll experience smooth video transmission, quick file transfers, and responsive network performance across all five ports—even during peak usage.
• Full and half duplex support with effortless auto-configuration. The TRENDnet PoE+ switch supports both full and half duplex modes, providing flexible compatibility with a wide range of devices and network topologies. Auto-negotiation and auto-MDI/MDI-X simplify setup by ensuring correct link parameters without manual intervention. This means you can connect your cameras, APs, and other PoE-enabled devices with confidence, knowing the switch will negotiate speed and duplex settings automatically for optimal performance.
• Compact, durable design ideal for desks, shelves, or small racks. Built with a sturdy black metal housing, the TPE-TG50g fits neatly into tight spaces while offering reliable operation in demanding environments. Its compact footprint makes it suitable for desktop deployments or discreet placement on a shelf, conference room cabinet, or small network closet. The fanless design helps keep noise to a minimum, ensuring quiet operation in office or home settings while maintaining solid cooling and longevity for continuous PoE streaming and power delivery.
• Plug-and-play, unmanaged operation for quick deployments. No complicated setup or management software is required. This is an unmanaged PoE switch, so you can simply connect devices and power adapters, and you’re ready to go. It’s an excellent choice for straightforward PoE expansion where you don’t need layered QoS, VLANs, or advanced configuration. The TPE-TG50g delivers dependable, plug-and-play performance that helps you scale your network quickly and efficiently as your needs grow.

Technical Details of TRENDnet 5-Port Gigabit PoE+ Switch TPE-TG50g

• Product type: 5-Port Gigabit PoE+ switch designed for small offices, retail spaces, and home networks.
• PoE budget: 31W total, distributed across four PoE+ ports to power compatible devices such as IP cameras and wireless access points.
• Ports: 5 x RJ-45 ports for data and PoE; 4 PoE+ capable ports, enabling power delivery to PoE devices over Ethernet; 1 non-PoE uplink/allowing network expansion.
• PoE standard: IEEE 802.3af/at (PoE+), providing higher power for compatible devices while maintaining compatibility with standard PoE devices.
• Switching capacity: 10 Gbps (non-blocking) to support smooth data transfer and minimal latency across all ports.
• Duplex modes: Supports both full duplex and half duplex operations for flexible device compatibility and reliable communications.
• Form factor and design: Black, compact metal enclosure suitable for desktop use or small mounting options; designed for durability and quiet operation in office environments.
• Management: Unmanaged switch with plug-and-play functionality—no complex configuration required.

How to Install TRENDnet TPE-TG50g

• Place the TRENDnet TPE-TG50g on a stable surface near your router or network switch, keeping it within easy reach of power and Ethernet cables.
• Connect the router or main network switch to the TPE-TG50g’s uplink port using a standard Ethernet cable. This uplink port provides the data path to your LAN while leaving the PoE ports available for powered devices.
• Plug in PoE-enabled devices—such as IP cameras or wireless access points—into the PoE+ ports. Ensure that your devices are compatible with IEEE 802.3af/at PoE standards to take full advantage of the 31W total budget.
• Connect a power source to the TPE-TG50g if required by your region and the exact model configuration, and then power on the switch. The device should begin forwarding traffic and powering connected PoE devices automatically.
• Verify connectivity by checking the Link/Act LEDs on each port. Confirm that PoE LEDs illuminate for powered devices and that network activity is visible on connected endpoints. If a device does not power on, verify compatibility, cabling, and power budget allocation across all PoE ports.
• For stable long-term operation, place the switch in a ventilated area away from direct heat sources and ensure cables are neatly organized to minimize strain on the connectors. This keeps your PoE devices powered reliably and helps prevent accidental disconnections.

Frequently asked questions

• Q: What devices can I power with the 31W PoE budget? A: The 31W total PoE budget can power a mix of PoE-enabled devices such as IP security cameras, wireless access points, and IP phones. When planning deployments, distribute power across the four PoE+ ports to stay within the budget while meeting each device’s power needs.
• Q: Is the TRENDnet TPE-TG50g a managed switch? A: No. The TPE-TG50g is an unmanaged PoE switch, designed for plug-and-play deployments without requiring network management software or configuration.
• Q: Can I use PoE on all ports? A: The switch provides four PoE+ ports capable of delivering power to compatible devices. One port is typically used as a non-PoE uplink, but you should verify the exact port configuration for your specific unit to optimize your layout.
• Q: Do I need a specialized power supply? A: The device uses a standard external power source appropriate to the model and region. The switch’s PoE budget allows you to power PoE devices through the Ethernet cables without requiring separate adapters for each device, but you may still need an external power supply to power the switch itself depending on regional configurations.
• Q: Is this switch suitable for small office deployments? A: Yes. The TRENDnet TPE-TG50g is ideal for small offices, retail environments, or home surveillance setups where you want to consolidate power and data delivery into a single, compact unit with simple, plug-and-play operation.
• Q: What kind of devices benefit most from PoE+ switches? A: IP cameras, wireless access points, VoIP phones, and other networked devices that require both power and data over a single Ethernet cable benefit most from PoE+ switches. The 31W budget of the TPE-TG50g makes it a practical choice for small-scale deployments where space, cabling, and energy efficiency matter.