TRENDnet SFP Single-Mode LC Module 4-Pack (TEG-MGBS10/4)

Elevate your fiber network with TRENDnet’s SFP Single-Mode LC Module 4-Pack. Engineered for reliability and scalability, these TEG-MGBS10/4 transceiver modules deliver Gigabit Ethernet speeds over long-haul single-mode fiber links. With a maximum data rate of 1.25 Gbps and a reach of up to 10 kilometers (6.2 miles), they are a versatile solution for campus networks, data centers, and backbones that demand high performance and dependable operation. This 4-pack provides a cost-effective, ready-to-deploy option for multi-link deployments, making it easy to expand or upgrade your network without compromising on quality. TRENDnet’s Lifetime Protection adds peace of mind, ensuring you’re covered for the life of the product.

• High-performance SFP modules for single-mode fiber — Each module is designed to operate over standard single-mode fiber, enabling long-distance connections with stable signal integrity and minimal attenuation, ideal for campus and data-center backbones where distance matters.
• Up to 1.25 Gbps data rate — These TRENDnet SFPs support gigabit Ethernet data rates, providing reliable throughput for typical enterprise applications, including LAN-to-LAN links, WAN aggregation, and storage networking scenarios that rely on robust, consistent performance.
• Long reach up to 10 km — With a transmission distance of up to 10 kilometers, you can bridge buildings, connect remote sites, or extend the reach of your core network without additional repeaters or optical amplifiers, helping to simplify your network topology.
• LC duplex interface for broad compatibility — The LC-type duplex connectors are widely used in fiber infrastructure, ensuring compatibility with a broad range of switches, routers, media converters, and patch panels that support SFP modules.
• 4-pack with Lifetime Protection — This bundle provides multiple transceivers in a single order, reducing procurement complexity and ensuring coverage under TRENDnet’s Lifetime Protection for long-term reliability.

Technical Details of TRENDnet SFP Single-Mode LC Module 4-Pack

• Product Type: SFP (Small Form-factor Pluggable) transceiver module
• Fiber Type: Single-Mode (SMF)
• Connector: LC Duplex
• Data Rate: Up to 1.25 Gbps
• Reach: Up to 10 km (6.2 miles)
• Standards: IEEE 802.3z Gigabit Ethernet
• Hot-Plug Capability: Yes
• Package: Includes four SFP modules
• Warranty/Protection: Lifetime Protection

How to Install TRENDnet SFP Single-Mode LC Module 4-Pack

Installing TRENDnet TEG-MGBS10/4 SFP modules is straightforward and designed to minimize downtime. Follow these steps to ensure a proper, secure, and reliable deployment:

• Prepare the network hardware: Verify that your switch, router, or media converter supports SFP modules and single-mode fiber. Confirm that the port is available and that you have the appropriate single-mode fiber patch cords with LC duplex connectors.
• Power control: If possible, place the network device into a maintenance window or power it down to avoid any hot-swapping issues. In many cases, hot-swapping is supported, but a controlled environment reduces risk during installation.
• Insert the SFP module: Align the module with the SFP slot on the device. Insert firmly until you hear a click or feel it seat securely. Avoid applying excessive force; if the module does not seat cleanly, remove and reinsert to ensure proper engagement of the connector and securing clips.
• Connect the fiber: Attach the LC duplex fiber patch cord to the SFP module. Ensure that the transmitter (Tx) and receiver (Rx) ends are correctly paired with the corresponding device ports in your topology. Handle fiber carefully to prevent micro-bends or contamination on the connectors.
• Power up and verify: Restore power to the device and enable the port if required. Check link status indicators and verify that the interface comes online. Use device management software or command-line tools to confirm the speed (1.25 Gbps) and duplex settings, and perform a basic connectivity test to verify data transmission.
• Document and test: Record the installation details, including port numbers, cable type, and fiber length. Run throughput or loopback tests to confirm performance, and monitor error counters for the first hours of operation to ensure a clean link.

Frequently Asked Questions

• What devices are compatible with TRENDnet TEG-MGBS10/4? These SFP modules are designed to be compatible with equipment that accepts standard IEEE 802.3z Gigabit Ethernet SFP modules and supports single-mode LC fiber interfaces. Check your switch or router vendor’s compatibility matrix to confirm support for TRENDnet SFPs on your specific model and firmware version.
• What kind of fiber should I use? Use single-mode fiber (SMF) with LC duplex connectors. Cat 9/OS2 or equivalent SMF cables are common choices for long-reach gigabit links. Ensure connectors are clean and free of dust for best performance.
• What is Lifetime Protection? TRENDnet’s Lifetime Protection guarantees replacement coverage for the product during its lifetime, subject to the company’s warranty terms. This coverage provides peace of mind for businesses deploying multi-link networks or maintaining long-term infrastructure.
• Can I deploy these modules on multiple vendor devices? Yes, if the devices support SFP modules and IEEE 802.3z Gigabit Ethernet standards. Always verify that the devices’ SFP slots are compatible with TRENDnet modules and that firmware supports the modules you plan to use.
• Do these modules require any special configuration? In most cases, TRENDnet TEG-MGBS10/4 SFPs work with default settings. Depending on your network equipment, you may need to configure port speed, duplex settings, and VLAN or link aggregation as part of your standard network setup. Always consult your device’s documentation for recommended configuration steps.