Tripp Lite by Eaton 1500W Compact Power Inverter – 3x 5-15R, USB Charging, Pure Sine Wave, Wired Remote

The Tripp Lite by Eaton 1500W Compact Power Inverter is the dependable power partner you need when mains electricity isn’t available. Designed for on-the-go power, this inverter converts 12V DC from your battery system into clean, reliable 120V AC power, making it ideal for job sites, camping trips, RV adventures, or emergency backup at home. Its pure sine wave output ensures sensitive electronics run smoothly and quietly, while three 5-15R outlets give you the flexibility to power multiple devices at the same time. A built-in USB charging port keeps phones, tablets, and small USB-powered gear topped up without needing extra adapters. The wired remote adds convenience and control, letting you switch the inverter on and off from a distance and monitor status without crawling behind the unit. Robust safety features, solid construction, and thoughtful cable management make this inverter a practical and durable choice for both professionals and weekend warriors. Whether you’re powering a laptop, tools, small fridge, or projector, the Tripp Lite 1500W Compact Power Inverter delivers dependable, clean power with ease. It’s compact enough to fit in tight spaces, yet capable enough to handle demanding loads, giving you peace of mind wherever your adventures or work take you. The combination of efficiency, safety protections, and user-friendly design reflects Tripp Lite’s commitment to quality and reliability, backed by Eaton’s trusted legacy in power management.

• Pure sine wave output provides clean, stable power for sensitive electronics, preventing flicker, hum, or damage to devices like laptops, medical gear, and audio equipment.
• 1500W continuous power with solid startup capability lets you run a range of tools and appliances without compromise, while still preserving battery life for longer use.
• Three 5-15R outlets allow simultaneous connection of multiple devices, reducing the need to swap cables during work or play.
• USB charging port keeps mobile devices ready, so you can stay connected even when off-grid or on the road.
• Wired remote included offers convenient on/off control and status monitoring from a distance, enhancing safety and ease of use in tight spaces.

Technical Details of Tripp Lite by Eaton 1500W Compact Power Inverter

• Power output: 1500W continuous, designed for reliable performance on 12V battery systems
• AC Output: 120V AC, 60 Hz
• Waveform: Pure sine wave for compatibility with sensitive electronics
• Outlets: 3 x 5-15R (NEMA 5-15R) for flexible, simultaneous connections
• USB Port: Built-in USB charging port for mobile devices and small accessories
• Remote: Wired remote control included for easy placement and control
• Protections: Overload, short circuit, overtemperature, and low/high voltage shutoff to protect both inverter and connected equipment
• Cooling: Designed for effective thermal management in practical environments
• Construction: Compact, rugged enclosure suitable for job sites, vehicles, boats, and off-grid setups

how to install Tripp Lite by Eaton 1500W Compact Power Inverter

Installing the Tripp Lite 1500W Compact Power Inverter is straightforward when you follow proper safety and wiring practices. This guide provides general steps suitable for most 12V battery systems used in cars, trucks, boats, RVs, and off-grid installations. Always consult your vehicle or battery manufacturer recommendations and local electrical codes before wiring. Ensure you have the correct gauge cabling, a suitable fuse or circuit breaker, and a secure mounting area with adequate ventilation to prevent overheating.

• Step 1: Plan the installation location. Choose an area with good ventilation, away from heat sources, moisture, and flammable materials. Ensure there is enough clearance for air flow and access to the wired remote when mounted.
• Step 2: Disconnect the battery. For safety, disconnect the negative (-) terminal first, then the positive (+). This prevents accidental short circuits during wiring.
• Step 3: Connect DC cables with appropriate protection. Attach the inverter’s DC input leads to the vehicle or battery terminals using the correct gauge wire as specified by the manufacturer. Install a suitable fuse or automotive-style circuit breaker close to the battery to protect the wiring from faults.
• Step 4: Grounding and mounting. Secure the inverter to a stable surface. If your system includes a chassis ground, connect it per your installation plan. Ensure all connections are tight and free from corrosion or damage.
• Step 5: Connect AC outputs and the USB port. Route the three 5-15R outlets to your devices with appropriate cables. Plug the USB-enabled device into the USB port. Mount or position the wired remote within reach for easy control and safety checks.
• Step 6: Power up and test. Turn on the inverter with the wired remote or the device’s power switch, then test each outlet with a suitable load to verify proper operation. Check for any warning LEDs or error codes, and consult the manual if an indicator appears.
• Step 7: Load management and safety. Avoid overloading the inverter. Distribute loads across the three outlets to maintain efficiency and keep an eye on battery voltage to prevent deep discharge. Periodically inspect cables and connections as part of routine maintenance.
• Step 8: Regular maintenance. Keep the inverter clean and dry. Check for signs of wear on cables, connectors, and the remote. If you notice unusual heat, noise, or voltage drops, power down the system and re-evaluate the installation or seek professional assistance.

Frequently asked questions

• Q: What is the advantage of a pure sine wave inverter over a modified sine wave inverter?

  A: Pure sine wave inverters produce a steady, clean AC waveform that closely matches utility power. This reduces electrical noise, improves efficiency, and protects sensitive electronics such as laptops, medical devices, HVAC controls, and audio equipment from potential damage or unreliable operation that can occur with modified sine wave inverters.

• Q: How many devices can I power at once with the 3x 5-15R outlets?

  A: The 1500W continuous rating supports multiple devices depending on total draw. Distribute loads across the three outlets to maximize efficiency and avoid overloading a single outlet. Always monitor total watts and avoid exceeding the inverter’s continuous power specification to maintain safe operation and battery life.

• Q: Can this inverter be used with a car, boat, or RV battery?

  A: Yes. It’s designed for 12V battery systems common in vehicles, boats, and RVs. Ensure the battery can supply the peak current required by your connected devices and that proper cabling, fusing, and ventilation are in place for safe operation.

• Q: Does the unit come with a remote and how does it work?

  A: The inverter includes a wired remote that lets you turn the unit on or off from a convenient location and monitor basic status indicators. This is especially useful in tight spaces or when the inverter is mounted out of reach. Use the remote to avoid reaching behind the unit during operation.

• Q: What safety features are included?

  A: The inverter includes protections such as overload, short circuit, overtemperature, and low/high voltage shutoff. These safeguards help protect both the inverter and connected equipment while preserving battery health and preventing electrical hazards.

• Q: How should I maintain and store the inverter when not in use?

  A: Store in a cool, dry location with adequate ventilation. Regularly inspect cables for wear, keep connectors tight and free from corrosion, and avoid exposing the unit to moisture or extreme temperatures. When not in use for extended periods, disconnect the battery to prevent parasitic drain and ensure devices are not left plugged in during storage.