Tripp Lite by Eaton DisplayPort to DVI over Cat5/6 Active Extender Kit

Upgrade your presentation and collaboration spaces with the Tripp Lite by Eaton DisplayPort to DVI over Cat5/6 Active Extender Kit. This compact, mission‑critical solution converts a DisplayPort audio/video signal into a DVI format and transmits it reliably over a single Cat5/6 cable to a distant display or projector. Designed for classrooms, conference rooms, lecture halls, digital signage, and home entertainment setups, this extender kit delivers smooth, long‑reach video and clear audio with minimal latency. Built for durable commercial use, the kit includes a transmitter and receiver with integrated pigtail connectors, enabling clean installations and flexible routing without sacrificing signal integrity. Whether you’re upgrading an existing AV system or deploying a new configuration, this extender kit provides a practical, cost‑effective way to extend your DisplayPort content across the room or across a building.

• Long‑range DisplayPort to DVI extension—transmit DisplayPort video and audio over Cat5/6 cable up to 125 ft (38 m) to a distant display or projector, maintaining signal quality across the link.
• Active extender design—the kit uses an active transmission path to preserve video integrity over longer runs, reducing interference and ensuring a stable connection for demanding AV setups.
• Pigtail transmitter and receiver—compact, self‑contained units with built‑in pigtail connectors simplify installation and minimize cable clutter for clean, professional installations.
• DP to DVI compatibility for broad display support—convert DisplayPort signals to DVI so you can drive a wide range of monitors, projectors, and displays that support DVI input with ease.
• TAA compliant—compliant with Trade Agreements Act requirements, making it suitable for government procurement and education environments that require compliant AV hardware.

Technical Details of Tripp Lite by Eaton DisplayPort to DVI over Cat5/6 Active Extender Kit

• Signal path: DisplayPort input on transmitter, DVI output on receiver
• Transmission medium: Cat5/6 Ethernet cable (single‑cable link between transmitter and receiver)
• Maximum extension: up to 125 ft (38 m) between transmitter and receiver
• Topology: Active extender kit with pigtail transmitter and receiver units
• Compliance: TAA (Trade Agreements Act) compliant
• Power: Distributed by included power adapters for transmitter and receiver

how to install Tripp Lite by Eaton DisplayPort to DVI over Cat5/6 Active Extender Kit

• Power off all devices and disconnect from the wall outlets before beginning installation.
• Connect the DisplayPort source (computer or media device) to the transmitter’s DisplayPort input.
• Connect a single Cat5/6 cable from the transmitter to the receiver, ensuring secure terminations at both ends.
• Connect the receiver’s DVI output to the display or projector using a DVI cable, and verify the display input source is correctly set.
• Attach the included power adapters to both transmitter and receiver and plug them into powered outlets.
• Power on the source device and the display; verify that video and, if applicable, audio are present at the display and that the picture is clear.

Frequently asked questions

• Q: What is the maximum distance supported by this extender? A: The extender supports up to 125 ft (38 m) over a Cat5/6 cable between the transmitter and receiver.
• Q: Does this kit carry audio along with video? A: Yes, the system is designed to carry both DisplayPort video and associated audio to the DVI display.
• Q: What type of cable is required? A: A single Cat5/6 cable is used to connect the transmitter and receiver.
• Q: Is the kit suitable for government or educational procurement? A: Yes, the kit is TAA compliant, making it eligible for government and education purchases where required.
• Q: What does the kit include? A: The kit includes a pigtail transmitter and a pigtail receiver along with the necessary power adapters for both ends, allowing a straightforward installation.