Tripp Lite by Eaton DVI over Cat5/6 Active Extender Kit, Transmitter/Receiver for Video, DVI-D Single Link, Up to 125 ft. (38 m), TAA

The Tripp Lite by Eaton DVI over Cat5/6 Active Extender Kit is the ultimate solution for delivering pristine DVI-D video over longer distances without compromising image quality or reliability. This robust transmitter/receiver pair is purpose-built for professional environments where crisp digital visuals matter—from dynamic digital signage and classroom displays to conference rooms, trade shows, and home theaters. By leveraging standard Cat5/6 cabling, this active extender provides a cost-efficient way to extend your DVI-D Single Link signal well beyond the typical reach of a direct DVI run, while maintaining superb signal integrity and a simple, straightforward installation. Whether you’re setting up a multi-room display in a corporate campus, projecting a presentation in a large classroom, or powering a high-visibility digital signage network, this extender kit is designed to keep your video sharp, color-accurate, and synchronized from source to screen.

• Extends DVI-D Single Link video over standard Cat5/6 cables up to 125 ft (38 m) to reach projectors, monitors, or TVs far from the source without degraded picture quality.
• Transmitter and Receiver pair provides a complete, plug‑and‑play solution for reliable long‑distance video distribution in busy commercial settings.
• Ideal for digital signage installations, classrooms, conference rooms, trade show booths, and other environments where clear, stable DVI video is essential.
• TAA‑compliant design makes it suitable for government procurement and enterprise deployments requiring compliant hardware.
• Simple installation with minimal cable requirements and a compact form factor that fits discreetly behind displays or equipment racks.

Technical Details of Tripp Lite by Eaton DVI over Cat5/6 Active Extender Kit

• Video: DVI-D Single Link compatibility for crisp, high‑quality digital video
• Distance: Supports transmission up to 125 ft (38 m) over Cat5/6 cables
• Hardware: Transmitter and Receiver included in the kit for a complete solution
• Compliance: TAA‑compliant hardware suitable for government and enterprise use
• Cable type: Uses standard Cat5/6 cabling to connect the Transmitter and Receiver

how to install Tripp Lite by Eaton DVI over Cat5/6 Active Extender Kit

Start by identifying your DVI source and the display device. Mount the Transmitter near the DVI source and the Receiver near the display. Use a single Cat5/6 cable to connect the Transmitter to the Receiver, up to the maximum distance of 125 ft (38 m). Connect the DVI output from the Transmitter to the DVI input on the source device, and connect the Receiver’s DVI output to the display’s DVI input. Ensure the Cat5/6 cable path is clear of interference and secured to minimize strain. Finally, power the Transmitter and Receiver according to the installation instructions and test the video signal on the display to confirm a clean, synchronized picture. If needed, adjust any EDID or display settings per your hardware configuration to achieve optimal color and alignment. For best results, place the devices in ventilated areas and use quality cables to preserve signal integrity over distance.

Frequently asked questions

• Q: What is the maximum transmission distance? A: Up to 125 ft (38 m) over Cat5/6 cables.
• Q: What video format does it support? A: DVI-D Single Link video signals.
• Q: What does the kit include? A: A Transmitter and a Receiver designed to work together to extend DVI over Cat5/6 cabling.
• Q: Is this extender compliant with government procurement requirements? A: Yes, the kit is TAA-compliant.
• Q: Where is this extender best used? A: It is well suited for digital signage, classrooms, conference rooms, trade show displays, and other environments where reliable long‑distance DVI video is required.