Tripp Lite by Eaton OmniVS 120V 1000VA 500W Line-Interactive UPS, Tower, USB port

The Tripp Lite by Eaton OmniVS 120V 1000VA 500W Line-Interactive UPS is an essential power backup solution designed to protect your valuable electronics from power disturbances, ensuring that your devices remain operational even during unexpected outages. With its advanced features and reliable performance, this tower UPS system is ideal for personal computers, networking equipment, and other sensitive electronics.

• Reliable Power Backup: The OmniVS UPS supports entry-level PC systems for up to 60 minutes during power failures, allowing you sufficient time to safely shut down your connected equipment without any risk of data loss.
• Automatic Voltage Regulation: Say goodbye to unexpected brownouts! The built-in Automatic Voltage Regulation (AVR) circuits can correct voltage levels as low as 83 volts, ensuring that your equipment receives stable power without relying on battery usage.
• Versatile Outlet Configuration: This line-interactive UPS system features six battery-supported outlets for your computer, monitor, and one critical peripheral device, along with two additional surge-only outlets for accessories like printers that don't require battery backup.
• Comprehensive Surge Protection: Equipped with built-in single-line RJ phone suppression jacks, the OmniVS protects your modem, fax machine, or cordless phone against power surges that can damage these devices.
• Efficient Run Time and Power Capacity: The UPS provides a 7-minute runtime with a full load of 1000VA/500 watts, and an 18-minute runtime with a half load of 500VA/250 watts, ensuring dependable performance during outages.

Technical Details of the Product

• Model: Tripp Lite by Eaton OmniVS 120V
• Power Capacity: 1000VA / 500W
• Type: Line-Interactive UPS
• Input Voltage: 120V
• Input Plug: NEMA 5-15P
• Output Outlets: 8 (6 UPS battery-supported, 2 surge-only)
• Protection: TEL/DSL/Ethernet
• Dimensions: Tower design

How to Install

Installing the Tripp Lite OmniVS UPS is straightforward:

1. Choose a suitable location for the UPS that is close to your computer and other devices you wish to protect.
2. Plug the UPS into a standard wall outlet using the NEMA 5-15P input plug.
3. Connect your devices to the six battery-supported outlets on the UPS for power backup during outages.
4. If you have devices that do not require battery support, connect them to the surge-only outlets.
5. For added protection, connect your phone line or DSL line to the UPS’s single-line RJ phone suppression jacks.
6. Turn on the UPS and ensure that all connected devices are receiving power.

Frequently Asked Questions

1. How long will the UPS keep my devices powered during an outage?

The UPS can provide a runtime of 7 minutes at a full load of 1000VA/500 watts and up to 18 minutes at a half load of 500VA/250 watts.

2. Can I use the UPS with any computer?

Yes, the Tripp Lite OmniVS is suitable for most entry-level PC systems and sensitive electronics.

3. Does the UPS provide surge protection for connected devices?

Yes, the UPS features surge suppression to protect your devices from power spikes and surges.

4. Do I need to install any software to use this UPS?

No special software installation is required; however, it is recommended to regularly check the status of the UPS and test its functionality.

5. What should I do if the UPS battery needs replacement?

You will receive a notification when the battery needs replacement. Please refer to the user manual for instructions on how to replace the battery safely.