Tripp Lite by Eaton SmartPro 120V 1kVA 800W Line-Interactive Sine Wave UPS, 1U Rack/Vertical, WEBCARDLX Network Interface, USB, DB9, 6 Outlets

The Tripp Lite by Eaton SmartPro 120V 1kVA 800W Line-Interactive Sine Wave UPS is the ultimate power protection solution for mission-critical rack-mounted equipment. This high-performance uninterruptible power supply is specifically designed to safeguard servers, network storage devices, and telecom hardware from unexpected power disruptions. With its advanced features and reliable performance, you can ensure that your sensitive electronics remain operational even during utility power outages.

• Fully Regulated Sine Wave Output: Delivers stable and clean AC power, ensuring the reliable operation of servers and sensitive electronic equipment.
• Network Management Capabilities: The pre-installed WEBCARDLX network interface allows remote access for power monitoring, configuration, and control, facilitating seamless management of your power supply via secure web browser or SNMP.
• Efficient Battery Backup: Provides up to 14 minutes of runtime at half load and 4 minutes at full load, ensuring your mission-critical devices remain powered during outages.
• Automatic Voltage Regulation (AVR): Maintains a consistent 120V output over a wide input range (83V-147V) without depleting battery power, protecting your equipment from undervoltage and overvoltage conditions.
• Versatile Installation Options: Designed to fit comfortably in a 1U rack space, it’s compatible with both 2- and 4-post racks, and includes hardware for easy mounting.

Technical Details of the Product

• Power Capacity: 1kVA / 800W
• Output Voltage: 120V
• Outlets: 6 NEMA 5-15R outlets (2 switchable)
• Surge Suppression Rating: 450 joules
• Input Power Cord Length: 10 ft. (3.05 m) with NEMA 5-15P input
• Communications Ports: USB, DB9, and an EPO port for emergency shutdown
• Dimensions: Fits in 1U rack space
• Weight: Approximately 30 lbs (13.6 kg)

How to Install

Installing the Tripp Lite SmartPro UPS is straightforward. Follow these steps for a successful installation:

1. Unbox the UPS and verify that all included components are present.
2. Using the provided hardware, mount the UPS in your rack or cabinet (ensure that you have at least 1U of space available).
3. Connect the 10 ft. power cord to a suitable power outlet with a 120V NEMA 5-15P input.
4. Connect your equipment to the UPS outlets, being mindful of the total power requirements.
5. For network management, connect the UPS to your network via the WEBCARDLX interface.
6. Power on the UPS and ensure that the front-panel LEDs indicate the proper status of power, voltage, and battery levels.
7. Configure the UPS settings through the web interface or your preferred management software.

Frequently Asked Questions

1. What is the runtime of the Tripp Lite SmartPro UPS?

The UPS offers approximately 14 minutes of runtime at half load and around 4 minutes at full load, providing adequate backup during power interruptions.

2. Can I use this UPS with a vertical mount cabinet?

Yes, the Tripp Lite SmartPro UPS is compatible with vertical mount cabinets, providing versatile installation options.

3. What kind of devices can I connect to this UPS?

This UPS is designed to support various mission-critical devices, including servers, network storage devices, and telecom hardware.

4. How does the Automatic Voltage Regulation (AVR) work?

AVR maintains the output voltage at a stable 120V, correcting under- and overvoltages (from 83V to 147V) without using battery power, ensuring that your equipment receives consistent and safe power.

5. Is network management supported?

Yes, the UPS includes a pre-installed WEBCARDLX network interface, allowing for remote monitoring, configuration, and control of the UPS through a secure web browser.