Tripp Lite by Eaton UPS Replacement 192VDC Battery Cartridge Kit (2 Sets of 8) for Select SmartOnline UPS

The Tripp Lite by Eaton UPS Replacement 192VDC Battery Cartridge Kit is a strategic upgrade designed to restore and extend the life of compatible SmartOnline UPS systems. Engineered for reliability and long-term performance, this premium kit delivers durable, high-quality battery cartridges in a complete, ready-to-install package. With two sets of eight cartridges, it provides significant value for businesses that rely on steady uptime, ensuring critical workloads and sensitive equipment stay protected during power interruptions. This replacement kit is built to meet the demanding needs of data centers, network closets, and telecom environments where uninterrupted power is non-negotiable.

• Restore peak runtime and reliability: When power events occur, the 192VDC cartridge kit helps restore the UPS’s ability to bridge outages, stabilize voltages, and keep critical devices running. By renewing the battery bank, you minimize the risk of unexpected shutdowns and protect valuable data, equipment, and customer-facing services. Properly replacing aging cells reduces the chance of voltage sag and extends the overall service life of your SmartOnline system.
• Two complete sets of eight cartridges: The kit includes two full sets of eight 192VDC battery cartridges, designed for balanced replacement across compatible modules. This configuration supports scalable maintenance, allowing you to refresh multiple banks without sourcing partial packs. The bundled approach simplifies procurement and reduces downtime during maintenance windows.
• Optimized for Select SmartOnline UPS platforms: Specifically designed to work with Tripp Lite by Eaton SmartOnline UPS models that accept 192VDC cartridge configurations. This alignment ensures proper fit, secure connections, and reliable operation after installation, so you can confidently plan maintenance cycles without compatibility concerns.
• High-grade construction for durability: Each cartridge is crafted with quality components intended to withstand temperature variations, vibration, and operational cycles. The optimized 192VDC design supports steady performance in challenging environments, from data centers to edge sites, ensuring consistent power delivery even under load fluctuations.
• Streamlined installation and maintenance: The kit is designed for straightforward replacement, with clear fitment in the designated slots and latch mechanisms that secure each cartridge. This user-friendly approach minimizes downtime, improves safety during handling, and makes routine battery maintenance more manageable for in-house IT teams or third-party service providers.

Technical Details of Tripp Lite by Eaton UPS Replacement 192VDC Battery Cartridge Kit (2 Sets of 8) for Select SmartOnline UPS

• Product type: Replacement battery cartridge kit for 192VDC SmartOnline UPS models
• Battery cartridge configuration: 2 sets of 8 cartridges
• Nominal system voltage: 192VDC
• Compatibility: For select Tripp Lite SmartOnline UPS models that support 192VDC cartridge kits
• Installation notes: Designed for quick, tool-assisted replacement and secure latch-style attachment
• Warranty: Manufacturer warranty—check accompanying documentation for details and coverage

Note: Specifications can vary by SKU and model. Always verify the model compatibility and follow the UPS manufacturer’s service manual when planning a battery cartridge replacement. This kit is intended to restore runtime and reliability for compatible devices and is not a generic replacement for non-compatible configurations.

How to install Tripp Lite by Eaton UPS Replacement 192VDC Battery Cartridge Kit

• Prepare your workspace and safeguard personnel: Before starting, power down the UPS per the manufacturer’s procedure, unplug from the mains, and wear appropriate personal protective equipment. Allow the system to cool if it has been running, and disconnect all external loads as required by your facility’s safety guidelines.
• Access the battery compartment: Locate the battery access panel or enclosure on the UPS. Use the recommended tools and follow the service manual to safely open the panel. Ensure you do not disturb other internal components and keep screws organized for reassembly.
• Remove existing cartridges (if applicable): If you are replacing existing cartridges, carefully disconnect and remove them one by one. Note the orientation and slot position of each cartridge to ensure the new units are installed correctly. Dispose of batteries in accordance with local regulations and company policy.
• Install the new cartridges: Begin with the first cartridge in the appropriate slot, aligning connectors and ensuring a secure fit. Snap or latch the cartridge into place as designed by the chassis. Repeat for all remaining cartridges in both sets, making sure every cartridge is seated evenly and securely. The two sets of eight should be placed according to the service manual’s guidance to balance the bank, optimize airflow, and maintain proper clearance for cooling.
• Reconnect, close, and test: Reassemble the panel, reconnect any cables, and power the UPS back on following the standard startup sequence. Run a battery test or a runtime calibration if the UPS software offers it, and verify that all cartridges are detected by the system. Monitor readouts for expected voltage and runtime, and update monitoring software with the new battery state of health as needed.
• Document and schedule preventive maintenance: Record the replacement date, model numbers, and serials of the cartridges for warranty and service records. Schedule a post-installation runtime test and periodic inspections in accordance with your facility’s maintenance plan to maximize battery life and system reliability.

Frequently asked questions

• Q: What models are compatible with this 192VDC Battery Cartridge Kit?
  A: The kit is designed for select Tripp Lite SmartOnline UPS models that accept 192VDC cartridge configurations. Always verify model compatibility by cross-referencing your UPS model number with the manufacturer’s documentation or support resources before purchase.
• Q: How many cartridges are included and why?
  A: The kit includes two complete sets of eight cartridges (16 cartridges total). This configuration supports comprehensive replacement across multiple banks, enables maintenance efficiency, and helps sustain balanced power delivery across the UPS system.
• Q: Do I need special tools to install the cartridges?
  A: The installation is designed to be straightforward and tool-assisted as required by the UPS chassis. Basic hand tools and adherence to the manufacturer’s safety guidelines are typically sufficient. Always follow the service manual for your specific model.
• Q: How long does installation take?
  A: Time can vary by model and access to the battery compartment, but a typical installation ranges from 30 minutes to 90 minutes for a complete cartridge replacement, including testing and initial startup. Large sites with multiple bays may take longer depending on the maintenance window.
• Q: What disposal and safety considerations apply to old batteries?
  A: Old battery cartridges must be disposed of in accordance with local regulations for electronic waste and hazardous materials. Many facilities use authorized battery recycling partners. Do not discard batteries with household waste, and ensure proper labeling and containment during transport.
• Q: What warranty or support is included?
  A: This replacement kit is offered with a manufacturer warranty. Warranty terms can vary by SKU and region, so review the product packaging or contact customer support for coverage details, including duration, transferability, and what is covered.
• Q: How can I verify battery health after replacement?
  A: After installation, run a battery test through the UPS management software or through the UPS keypad if available. Check the battery state of health (SOH), the remaining runtime estimates, and ensure that all cartridges are recognized by the system. Schedule periodic health checks as part of your preventive maintenance plan.
• Q: Are there any safety precautions I should follow?
  A: Yes. Always follow the manufacturer’s safety guidelines, wear protective gear, and ensure power is fully disconnected before opening the unit. Avoid touching exposed terminals and store batteries upright to prevent leaks or damage. If you’re not trained for battery replacement, hire a qualified technician or service provider.