Tripp Lite USB 3.0 Singlemode Fiber Optic Transceiver Ethernet Adapter

Unlock the full potential of your USB devices with a rugged, high-speed bridge to a wired Ethernet network. This Tripp Lite by Eaton USB 3.0 Singlemode Fiber Optic Transceiver Ethernet Adapter combines USB connectivity with a reliable fiber optic link, delivering true 10/100/1000 Mbps performance over long distances. With 1310 nm singlemode optics and LC connectors, it’s designed for demanding environments where distance, security, and stable network access matter.

• Blazing-fast USB 3.0 to Ethernet bridge: Transforms a USB-equipped device into a wired Ethernet node without requiring an internal network card, enabling instant access to a full-speed 10/100/1000 Mbps network. Perfect for laptops, tablets, and other USB-enabled devices that need reliable wired connectivity in offices, labs, or classrooms.
• Long-haul, high-quality fiber link: Uses singlemode 1310 nm fiber with LC duplex connectors to deliver clean signal integrity over extended distances—up to 5 kilometers—making it ideal for campus networks, data centers separated across rooms, or remote office connections where copper is impractical.
• Hardware you can trust: Built by Tripp Lite (a brand under Eaton), known for durable, enterprise-grade networking accessories. The compact, robust design is intended to withstand daily use in professional environments while remaining easy to deploy and service.
• Auto-negotiation for seamless compatibility: Supports auto-negotiation for 10/100/1000 Mbps Ethernet, adapting to your network speed without manual tuning. This ensures optimal performance whether connecting to legacy switches or modern gigabit networks.
• Easy setup and broad compatibility: Designed for straightforward deployment with minimal configuration. The adapter is intended to work with standard USB hosts and common operating systems, enabling quick integration into existing IT infrastructure without adding PCIe cards or additional hardware.

Technical Details of Tripp Lite USB 3.0 Singlemode Fiber Optic Transceiver Ethernet Adapter

• Interface: USB 3.0 (host connection) to USB-enabled device
• Ethernet support: 10/100/1000 Mbps auto-negotiation
• Optical interface: Singlemode fiber, 1310 nm wavelength
• Distance capability: Up to 5 km (approximately 3.1 miles) over fiber
• Fiber connectors: LC duplex
• Product type: USB-to-Ethernet adapter with fiber optic transceiver functionality
• Power: Typically powered via USB connection; external power source may be used in configurations requiring additional power

how to install Tripp Lite USB 3.0 Singlemode Fiber Optic Transceiver Ethernet Adapter

• Power down the host device if required by your IT policy, then connect a USB 3.0 cable from the adapter to an available USB port on your computer or USB-enabled device.
• Connect the LC duplex fiber optic cable from the adapter to the corresponding port on your network switch, router, or fiber optic patch panel. Ensure the fiber is properly seated and the connectors are clean.
• Power on the host device and allow the operating system to detect the new hardware. If prompted, install any recommended drivers or software from the manufacturer’s website or support materials.
• Configure the network settings on your computer or device to use the new Ethernet adapter (usually by selecting the new interface in your network settings and ensuring DHCP or a static IP is configured as required).
• Test the connection by pinging a known address on the wired network or by loading a resource hosted on the network. If the link does not establish, verify fiber alignment, ensure the correct fiber type (singlemode 1310 nm), and confirm the speed settings on both ends of the link.

Frequently asked questions

• What is this device? It is a USB 3.0 to singlemode fiber optic transceiver Ethernet adapter that enables a USB-equipped device to connect to a wired 10/100/1000 Mbps Ethernet network using LC duplex fiber optics.
• How far can I extend the network? Up to 5 kilometers over singlemode fiber, depending on fiber quality and link equipment, allowing long-range connections between buildings or across campuses.
• What fiber type and connectors are used? Singlemode fiber with LC duplex connectors are used to provide a stable, high-quality link over long distances.
• Do I need drivers? Some operating systems may require drivers or software to recognize the new USB-to-Ethernet interface. Check the Tripp Lite/Eaton support site for the latest drivers if the OS does not automatically install them.
• Is external power required? The adapter is typically powered via USB. In some configurations or for certain setups with higher power demands, an external power source may be used as per your IT environment requirements.
• Is it compatible with all operating systems? The device is designed for broad compatibility with common operating systems when drivers are available. Always verify driver availability and OS support from the manufacturer’s official resources for your specific version.