Tripp Lite by Eaton Wall-Mount Double Shelf for IT Equipment - 20 in. Wide, Up to 250 lb

The Tripp Lite by Eaton Wall-Mount Double Shelf for IT Equipment is designed to declutter crowded workspaces while keeping critical networking gear within arm’s reach. With a generous 20-inch wide footprint and a total weight capacity of up to 250 lb (113 kg), this durable two-shelf unit is ideal for organizing routers, small switches, modems, access points, and other essential IT devices. Built for reliability in busy office settings or home networks, it combines sturdy steel construction with ventilated shelves to promote airflow and help maintain equipment performance and longevity. Whether you’re outfitting a small data closet or optimizing a home office setup, this wall-mount double shelf delivers secure support and streamlined accessibility for your IT equipment.

• Efficient wall-mount design that frees valuable floor space while keeping critical networking gear organized and within easy reach for maintenance, upgrades, or troubleshooting.
• Double-shelf configuration provides dedicated, staggered surfaces for different devices, facilitating better organization, simple access, and optimized airflow around heat-generating components such as routers and switches.
• Sturdy steel construction supports a combined weight of up to 250 lb (113 kg), ensuring dependable performance for a range of compact IT devices without sag or excessive vibration.
• Ventilated shelves promote air circulation around equipment, helping to dissipate heat, maintain consistent performance, and extend the life of network gear in tight spaces.
• Designed for straightforward installation on suitable walls, with attention to cable management and tidy routing to minimize clutter while preserving accessibility for service or upgrades.

Technical Details of Tripp Lite by Eaton Wall-Mount Double Shelf for IT Equipment

• Width: 20 inches
• Weight capacity: Up to 250 lb (113 kg) total
• Shelves: Double-shelf design
• Mounting: Wall-mount
• Material: Steel
• Ventilation: Ventilated shelf design

How to Install Tripp Lite by Eaton Wall-Mount Double Shelf for IT Equipment

Install this wall-mount double shelf in a location that provides solid support and allows for proper ventilation of connected devices. Begin by planning the mounting area and ensuring you have the appropriate hardware for your wall type and weight load. If possible, locate wall studs to maximize stability, and choose a secure mounting pattern that aligns with the shelf’s mounting holes. Before mounting, double-check that the planned placement provides enough depth for all devices and leaves adequate space for cables and air flow. Once you have the right tools and anchors, follow these general steps to install the shelf safely and effectively:

• Inspect the wall surface and identify studs or solid backing capable of supporting the combined weight of the shelf and equipment. Use a stud finder if available and mark the stud locations clearly.
• Position the wall-mount brackets or mounting points at the measured intervals to align with the shelf’s pre-drilled holes. Hold the bracket in place and use a level to ensure it is perfectly horizontal before marking drilling locations.
• Drill pilot holes at the marked locations and insert appropriate anchors or fasteners for your wall type. Use heavy-duty screws designed to bear the anticipated load, and ensure screws engage securely with studs or anchors.
• Attach the wall-mount brackets or frame to the wall using the chosen fasteners, verifying that each connection is snug and square. Double-check with a level for precision before proceeding.
• Mount the double shelves onto the brackets or mounting rails according to the manufacturer’s instructions. Confirm that the shelves are securely engaged and level, then test the stability by applying gentle pressure to each surface.
• Route power and data cables neatly, using cable management features or ties to minimize clutter and maximize airflow. Place devices on the shelves, distribute weight evenly, and ensure that heat-generating equipment has adequate clearance for ventilation.
• Inspect the setup for cable strain or obstruction, and perform a brief power-on test of the connected equipment to confirm stable operation and accessibility for future maintenance or upgrades.

Frequently asked questions

• Q: What types of devices fit on the Tripp Lite wall-mount double shelf? A: This shelving solution is designed to accommodate essential IT devices such as routers, small switches, modems, access points, and other compact networking gear, with a total weight limit of up to 250 lb (113 kg).
• Q: How much space does the shelf require in width and depth? A: The unit provides a 20-inch-wide footprint. Depth and height specifics are not listed here, but the double-shelf design is intended for compact configurations in closets, offices, or dedicated network enclosures where wall mounting is practical.
• Q: Can I install this shelf on any wall? A: For best results, mount it to solid structural backing (such as wall studs) or use appropriate anchors rated for the weight. Always verify wall integrity and weight distribution before installation.
• Q: Does the shelf improve cooling for network equipment? A: Yes. The shelves are ventilated to promote airflow around equipment, which helps dissipate heat and maintain stable performance in confined spaces where airflow may be limited.
• Q: Is professional installation recommended? A: If you’re unsure about mounting to walls or handling electrical and data cables, consider professional installation to ensure safety and optimal weight distribution.