Description
Valcom V-420 Wired Dynamic Microphone
The Valcom V-420 is a dependable, wired dynamic handheld microphone built for clear voice reproduction in public address, conferencing, classrooms, broadcast setups, and live performances. With a practical 6 ft cord and a responsive 100 Hz to 5 kHz frequency range, this mic delivers a balanced, natural voice clarity while minimizing latency and interference common with wireless systems. Designed for everyday use in demanding environments, the V-420 blends sturdy construction with simple, plug-and-play operation, making it a trusted choice for technicians, presenters, and performers who demand reliable wired performance.
- Crystal-clear voice output with a wide 100 Hz to 5 kHz response. The V-420 is tuned to capture the warmth of voice while preserving intelligibility in speeches, lectures, and Q&A sessions. By focusing on the core vocal frequencies, it helps speakers project confidently against room noise, ensuring audiences hear every word with minimal effort. The dynamic design works well on both intimate podiums and larger stages, delivering consistent results across a variety of room acoustics.
- Durable handheld build for everyday use. Built to withstand frequent handling, the V-420 features a rugged enclosure and a protective grille that stands up to the rigors of live events, classrooms, and broadcast environments. The handheld form factor provides familiar control for presenters, allowing natural speaking distance and quick mic placement without fumbling with cables or adapters. This robust construction translates to long-lasting reliability, reduced maintenance, and fewer interruptions during important moments.
- Low-latency wired connectivity eliminates wireless dropouts. Because it’s a wired microphone, the V-420 offers immediate, real-time audio transfer with zero wireless latency. This makes it ideal for live announcements, stage performances, and conferencing where timing matters. The stable connection helps prevent gaps in sound, ensuring your message arrives cleanly and on cue, every time you speak.
- Versatile compatibility for a wide range of systems. The V-420 is designed to work smoothly with most standard PA, mixer, and conferencing setups that accept a wired dynamic microphone. Its simple, straightforward operation means technicians can deploy it quickly in schools, churches, corporate environments, and event venues. Whether you’re upgrading from a handheld dynamic mic or integrating into an existing sound system, the V-420 offers reliable performance without the complexity of advanced wiring or compatibility concerns.
- Great value for professional sound without the fuss. For venues that require dependable voice reproduction without the headaches of complex setups or battery-powered mics, the V-420 provides a practical, cost-effective solution. Its wired design minimizes maintenance and battery-related issues while delivering solid, clear speech for audiences of all sizes. This mic is a smart choice for operators who want straightforward operation, durable construction, and consistent results across multiple events and rooms.
Techncial Details of Valcom V-420
- Type: Dynamic handheld microphone
- Frequency response: 100 Hz – 5 kHz
- Cable length: 6 ft
- Connection: Wired
- Application: Public address, conferences, classroom announcements, live performances
- Power requirement: None (dynamic microphone – no external power needed)
- Polar pattern: Not specified by provided details
How to install Valcom V-420
- Unpack and inspect the package to confirm the Valcom V-420 and its accompanying cord (6 ft) are present. Check the microphone’s grille for any shipping damage and ensure the cable is intact without fraying or kinks.
- Connect the microphone to your audio system’s standard microphone input using the included 6 ft cord. If your setup uses a mixer, PA amplifier, or conferencing unit, plug the mic into an available mic input and avoid over-tightening the connector to prevent connector damage.
- Power up your audio chain and set the initial input gain to a moderate level. Start with a conservative gain setting to prevent distortion, then gradually increase as you test during talk and performance segments.
- Speak into the microphone from a comfortable distance (typically about 6–12 inches). Monitor the signal on your mixer or speakers, watching for clean vocal tones, proper proximity effect, and any unwanted noise or pops. If needed, use a pop filter or adjust distance to reduce sibilance and plosives.
- Fine-tune the system by adjusting the mic input’s equalization and the overall channel gain. Conduct a quick test with a sample voice, then make final adjustments to ensure clear intelligibility across the room. After setup, perform routine checks before each event to maintain consistent performance.
Frequently asked questions
-
Q: Is the Valcom V-420 a wireless microphone?
A: No. The Valcom V-420 is a wired dynamic handheld microphone designed for reliable, low-latency performance without wireless interference.
-
Q: What is the frequency response of the V-420?
A: The microphone features a frequency response of 100 Hz to 5 kHz, which helps capture clear vocal warmth while preserving intelligibility for announcements, speeches, and performances.
-
Q: Does the V-420 require phantom power?
A: No. As a dynamic microphone, the V-420 does not require external phantom power and can operate directly from standard mic inputs on mixers and PA systems.
-
Q: What applications is the V-420 best suited for?
A: It is well-suited for public address, conferences, classrooms, worship services, and live performances where dependable wired audio and straightforward operation are priorities.
-
Q: What should I consider for optimal performance?
A: Maintain proper microphone handling, keep the cable free from tension, adjust gain to avoid distortion, and position the mic to minimize room noise. Regular checks and simple maintenance help ensure consistent audio quality over time.
Customer reviews
Showing - Of Reviews