Vertiv Liebert Hot-Swap Internal 5 Ah, 240V Lead-Acid Battery for Liebert GXT4-6000RTL630, GXT4-5000RT230, and GXT4-6000RT230 UPS System

Power reliability is critical for protecting servers, networking gear, and critical IT infrastructure. The Vertiv Liebert Hot-Swap Internal 5 Ah, 240V Lead-Acid Battery is designed to be a trusted, maintenance-friendly upgrade for Liebert GXT4 UPS systems. This internal battery module delivers seamless backup support during outages, helping to preserve uptime, safeguard workloads, and minimize costly downtime. Crafted for ease of service and long-term performance, it integrates neatly with compatible Liebert GXT4 models to ensure continuous protection for data centers, telecom rooms, and distributed IT environments.

• Seamless hot-swap internal design lets you replace the battery without interrupting essential power to connected loads, reducing downtime and maintenance windows.
• 5 Ah capacity at 240V provides reliable runtime for mid-load applications and supports smoother transitions during short outages, keeping critical equipment operational.
• Specifically compatible with Liebert GXT4-6000RTL630, GXT4-5000RT230, and GXT4-6000RT230 UPS systems, delivering a precise fit, safe installation, and optimal performance.
• Lead-acid (VRLA) sealed chemistry delivers high reliability with low maintenance requirements, built-in protection against overcharge and short circuits for safer operation.
• Compact, maintenance-friendly module with standardized connectors, designed for data-center-grade reliability and quick field replacement to minimize downtime.

Technical Details of Vertiv Liebert Hot-Swap Internal 5 Ah, 240V Lead-Acid Battery

• Type: Sealed Lead-Acid (VRLA) battery module
• Capacity: 5 Ah
• Voltage: 240 V
• Configuration: Internal hot-swap battery module designed for Liebert GXT4 UPS systems
• Compatibility: Liebert GXT4-6000RTL630, GXT4-5000RT230, GXT4-6000RT230

how to install Vertiv Liebert Hot-Swap Internal 5 Ah, 240V Lead-Acid Battery

The Vertiv Liebert hot-swap battery module is engineered for maintenance-friendly replacement. To install, follow these general steps to minimize downtime and preserve system integrity. Always refer to the Liebert GXT4 installation and maintenance guide for model-specific details and safety precautions. If your organization has a formal maintenance procedure, follow that protocol.

1) Prepare the workspace and safety gear. Ensure you have a non-conductive, static-safe environment and that personnel handling the battery are equipped with appropriate PPE. Verify that the UPS is connected to a suitable power source and that loads are within the UPS’s supported operating range.

2) Access the battery bay. Remove the maintenance access panel or battery bay cover as instructed by the Liebert GXT4 service manual. Ensure you can clearly see the existing battery connections and mounting hardware before proceeding.

3) Isolate and disconnect the old battery (if replacing). Gently disconnect the battery connectors from the UPS harness, taking care not to force any cables. If the unit is still in service, rely on the hot-swap design and ensure loads remain powered. Keep the old battery in a safe location for proper disposal or recycling according to local regulations.

4) Align and install the new 5 Ah battery module. Slide the hot-swap battery into the bay, align it with mounting points, and reattach any securing brackets or latches. Connect the battery leads to the UPS connectors using the proper polarity and firmly seat the connectors to ensure a solid electrical path.

5) Close the bay and perform a system check. Replace the maintenance panel, restore access, and power on or resume normal operation. Run a self-test or notify the UPS monitoring software to perform a battery test to confirm proper operation and runtime performance. Verify that alarms and LED indicators show normal status.

Note: Even with hot-swap capability, it is essential to follow your organization’s safety and maintenance procedures. If you are unsure about the procedure or whether a maintenance window is required, consult the Liebert GXT4 manual or contact Vertiv support for guidance before proceeding.

Frequently asked questions

• What models is this battery compatible with? It is designed for Liebert GXT4-6000RTL630, GXT4-5000RT230, and GXT4-6000RT230 UPS systems, providing a precise fit and reliable backup performance across these configurations.
• Is this a hot-swap battery? Yes. The internal module is built for hot-swap replacement, enabling maintenance with minimal downtime and uninterrupted loads.
• What chemistry is used? The battery uses sealed lead-acid (VRLA) chemistry, offering dependable performance with low maintenance and safe, contained operation.
• What is the expected service life? VRLA lead-acid batteries typically deliver several years of service under proper operating conditions. Actual runtime and life depend on temperature, load, and cycling patterns of the UPS environment.
• How should I dispose of or recycle the old battery? Follow local regulations for lead-acid battery disposal. Most regions offer dedicated recycling programs; check with your facility’s waste management policies or contact Vertiv support for guidance on compliant recycling options.