WatchGuard AP130 Dual Band 802.11ax 1.73 Gbit/s Wireless Access Point - Indoor

The WatchGuard AP130 Dual Band 802.11ax Wireless Access Point is the perfect Wi-Fi 6 solution designed specifically for low-density indoor environments such as small offices or remote work setups. With its robust features and enhanced security measures, the AP130 provides a seamless and secure wireless experience, making it an essential asset for your network infrastructure.

• Wi-Fi 6 Technology: The AP130 is equipped with the latest Wi-Fi 6 2x2 radio, delivering incredible wireless performance. Enjoy fast and reliable connectivity with maximum data rates of up to 1.2 Gbps on the 5 GHz band and 574 Mbps on the 2.4 GHz band.
• Integrated Security: This access point supports advanced WPA3 encryption, ensuring a secure Wi-Fi experience. Protect your network from unauthorized access without compromising on speed or performance.
• Enhanced Coverage: The AP130 features four internal antennas that offer an optimal signal range and strength, making it perfect for small offices where coverage is essential.
• Management License Requirement: The WatchGuard AP130 requires an active Management License, either Standard or USP, to activate and manage the device via WatchGuard Cloud, ensuring you have control over your network settings and security features.
• Power Over Ethernet (PoE): Simplify your installation process with PoE capabilities. The AP130 supports 802.3at (PoE+) and includes 12V/2A DC input, allowing you to power the device through your network cable, reducing the need for additional wiring.

Technical Details of the Product

• Model: WatchGuard AP130
• Wireless Standards: 802.11ax (Wi-Fi 6)
• Maximum Data Rate: 1201 Mbps on 5 GHz and 574 Mbps on 2.4 GHz
• Transmission Power: 22 dBm
• Antenna Gain: 3dBi
• Ethernet Port: 1 port supporting up to 1 Gbps
• Power Supply: 12V/2A DC In, PoE+ (802.3at)

How to Install

Installing the WatchGuard AP130 is a straightforward process. Follow these steps for a successful setup:

1. Determine the optimal location for the access point, ideally in a central area to maximize coverage.
2. Connect the Ethernet cable from your router or switch to the Ethernet port of the AP130.
3. If using PoE, ensure that your network switch supports PoE and connect it to the AP130 for power.
4. Plug in the power adapter if not using PoE.
5. Access the WatchGuard Cloud using your Management License to configure the AP130 settings according to your network requirements.
6. Once configured, test the wireless connection in various areas to ensure optimal performance.

Frequently Asked Questions

1. What type of environments is the WatchGuard AP130 suitable for?

The AP130 is designed for low-density indoor environments such as small offices or remote work setups, providing reliable and secure Wi-Fi connectivity.

2. Do I need a Management License to operate the WatchGuard AP130?

Yes, the AP130 requires an active Management License (either Standard or USP) to access and manage the device through WatchGuard Cloud.

3. What is the maximum data rate supported by the AP130?

The WatchGuard AP130 supports a maximum data rate of 1.2 Gbps on the 5 GHz band and 574 Mbps on the 2.4 GHz band.

4. Can I power the AP130 using a Power over Ethernet (PoE) switch?

Yes, the AP130 supports PoE+ (802.3at), allowing you to power the device through the Ethernet cable, simplifying the installation process.

5. What security features does the AP130 offer?

The AP130 comes with WPA3 encryption, ensuring a secure wireless experience for users and protecting the network from potential threats.