Description
Wiremold OFR Series Overfloor Raceway Crossover Kit
Unlock dual-sided power and data distribution with the Wiremold OFR Series Overfloor Raceway Crossover Kit. Engineered to integrate with the OFR48 4-Gang Device Box, this kit seamlessly bridges access on both sides, delivering a clean, professional cable pathway that maximizes space utilization and improves reliability in commercial and residential installations. With RoHS-compliant materials and a focus on durable, low-profile cable management, this crossover kit is the smart choice for tidy, accessible wiring solutions.
- Dual-sided access to power and data channels for the OFR48 4-Gang Device Box, enabling flexible installation layouts and easier service access.
- Optimized cable routing that makes the most of available space behind floors and along walls, helping to reduce clutter and improve airflow around cables.
- RoHS-compliant construction to meet modern environmental and safety standards while maintaining dependable performance in everyday use.
- Specifically designed crossover fitting for the OFR Series Overfloor Raceway, delivering a secure, integrated cable management solution with minimal bulk.
- Enhances safety and organization by providing a neat, protected pathway for both power and data cables, reducing strain and wear on conductors.
Technical Details of Wiremold OFR Series Overfloor Raceway Crossover Kit
- Product type: Overfloor Raceway Crossover Kit for the OFR Series
- Compatibility: Designed to work with the OFR48 4-Gang Device Box and its dual-sided cable routing configuration
- RoHS compliance: Yes, meets RoHS material restrictions
- Function: Enables access to power and data on both sides of the OFR48 4-Gang Device Box for flexible installation layouts
- Construction: Durable cable management crossover fitting designed to integrate with Wiremold OFR series raceways
How to Install Wiremold OFR Series Overfloor Raceway Crossover Kit
Before you begin, ensure the power is turned off at the main panel and that you are following local electrical codes and guidelines. Plan your routing path to maximize space and minimize cable bends, and verify that the OFR48 4-Gang Device Box is securely mounted prior to installing the crossover kit.
Step 1: Prepare the installation area. Clear the area around the OFR48 4-Gang Device Box and identify the best positions for dual-sided access. Remove any obstructions and measure the available depth and width to ensure the crossover kit will fit comfortably without interfering with surrounding components.
Step 2: Align the crossover kit with the OFR48 4-Gang Device Box. Check that the kit’s mounting surfaces align with the box’s contours and that the crossover fitting will support the intended dual-channel configuration. Have mounting screws or hardware on hand if required by the kit model.
Step 3: Attach the crossover kit to the device box. Secure the crossover components firmly to the OFR48 4-Gang Device Box, ensuring that both sides have clear access to the corresponding power and data pathways. Avoid overtightening to preserve material integrity and alignment.
Step 4: Route cables through the dual channels. Feed power and data cables into their respective sides of the crossover kit, guiding them through the built-in pathways. Use any integrated tie-down points or clips to organize cables neatly and prevent shift or damage during operation.
Step 5: Complete the installation and test. Reconnect powered components, restore power, and test each channel to confirm continuous connectivity and correct routing. Verify that cables have no sharp bends and that they remain fully enclosed within the raceway channels for protection.
Tip: When routing cables, maintain separation between high- and low-voltage lines where the kit allows, and keep data cables away from heavy power cables to minimize interference. If your installation includes future expansions, plan the pathways to allow additional cables without crowding the existing channels.
Maintenance is straightforward: periodically inspect the crossover kit for any signs of wear, ensure cables remain secured, and verify that the dual-sided passages continue to provide unobstructed access. The kit’s design emphasizes reliability in busy environments, making routine checks quick and simple.
Frequently asked questions
- What is the Wiremold OFR Series Overfloor Raceway Crossover Kit used for? It enables access to power and data on both sides of the OFR48 4-Gang Device Box, creating a flexible, dual-sided routing solution for cables.
- Is the kit RoHS compliant? Yes. The kit is manufactured to meet RoHS restrictions, emphasizing safer and more environmentally friendly materials.
- Which device box models does this kit fit? It is designed for the OFR48 4-Gang Device Box within the OFR Series overfloor raceways, providing compatibility with dual-sided cable routing.
- What are the installation requirements? Ensure power is off, the device box is securely mounted, and you follow local electrical codes. Plan the routing to maximize space and minimize cable strain.
- Can I use this kit for future upgrades or expansions? Yes, the dual-sided configuration is designed to accommodate flexible layouts and potential future cable additions while maintaining tidy cable management.
Customer reviews
Showing - Of Reviews
