Description
Wiremold RC4ATC Multi-Service Assembled Poke-Thru Device
The RC4ATC from Wiremold is a high-capacity four-receptacle poke-thru power distribution module designed to deliver clean, convenient access to outlets right where you need them. This assembled device houses four prewired 20A receptacles, each duplex receptacle wired as a separate circuit to optimize load distribution and minimize the risk of nuisance tripping in busy spaces. It can be configured as standard receptacles or with isolated-ground wiring to reduce electrical noise for sensitive equipment, making it an excellent solution for classrooms, conference rooms, auditoriums, and corporate environments where performance and aesthetics matter. With finish flange options spanning neutral gray, classic black, and ivory, plus brushed-metal looks in aluminum and brass, the RC4ATC blends effortlessly with contemporary interiors while delivering reliable power where it’s most needed. Engineered for commercial applications, this poke-thru device is designed to install neatly in suspended ceilings or raised floors, helping you maintain a clean, unobtrusive appearance while keeping critical outlets readily accessible.
- Four prewired 20A receptacles — The RC4ATC provides four ready-to-use 20-amp receptacles in a single, compact poke-thru assembly. This configuration concentrates power access in one convenient location, reducing cable clutter and providing ample outlets for presentation equipment, laptops, AV gear, and other office essentials without sacrificing floor or ceiling space.
- Independent circuit wiring for each duplex — Each duplex receptacle is wired as a separate circuit, delivering enhanced flexibility for load management. This arrangement supports diverse equipment needs within the same room, making it easier to isolate devices or segments of equipment to protect sensitive systems and simplify maintenance or future upgrades without impacting other outlets.
- Isolated-ground capability — The duplex can be wired either as a standard receptacle or with isolated ground. Isolated-ground wiring helps minimize electrical noise and ground-loop issues that can affect AV equipment, projectors, audio systems, and high-performance computing devices, delivering steadier performance in demanding environments.
- Finish flange options for seamless integration — Choose from gray (GY), black (BK), ivory (VY), or brushed metal finishes in aluminum (AL) and brass (BS). These flange finishes enable the poke-thru to blend with or accent your interior design, providing a professional look that complements furniture, fixtures, and ceiling systems across commercial spaces.
- Durable, commercial-grade construction — Built to withstand high-usage environments, the RC4ATC features sturdy materials and a robust poke-thru housing. Its design is optimized for frequent installations in offices, meeting rooms, classrooms, and other high-traffic areas where reliable access to power is essential and aesthetics must be preserved.
Technical Details of Wiremold RC4ATC Multi-Service Assembled Poke-Thru Device
The RC4ATC is engineered to provide a durable power distribution solution with flexible wiring options suited to modern commercial interiors. Four 20A receptacles are prewired and arranged to deliver efficient, independent circuit distribution within a single poke-thru opening. The device supports both standard receptacle configurations and isolated-ground wiring to minimize noise for sensitive equipment. Finishes include gray, black, ivory, and brushed-metal options in aluminum and brass, enabling designers to match any architectural palette. Designed for ceiling and floor openings, this unit helps maintain a tidy, professional look in meeting spaces, classrooms, and shared work environments. The combination of four circuits and isolated-ground adaptability makes it a versatile choice for multi-zone rooms where different devices require separate power feeds and controlled grounding paths. The RC4ATC also emphasizes ease of maintenance and serviceability, with a compact footprint that fits standard poke-thru cutouts while delivering robust electrical performance over years of daily use.
- Receptacle configuration: Four prewired 20A receptacles; duplex units wired as separate circuits to enable independent power distribution and simplified zoning.
- Grounding options: Duplex receptacles can be wired as standard or isolated-ground to reduce electrical noise for sensitive loads.
- Finish options: Finish flange available in gray (GY), black (BK), ivory (VY), and brushed metal finishes in aluminum (AL) and brass (BS).
- Mounting and compatibility: Designed for ceiling or floor poke-thru openings, delivering a clean, accessible power source with a professional appearance in commercial spaces.
- Recommended use: Ideal for conference rooms, classrooms, meeting areas, auditoriums, and other environments requiring durable, organized power delivery with minimal visual impact.
How to install Wiremold RC4ATC Multi-Service Assembled Poke-Thru Device
For safety and compliance, installation should be performed by a licensed electrician or qualified installer in accordance with local codes and the manufacturer’s instructions. The following general steps provide guidance for planning and execution in typical commercial settings:
- Plan the opening location in the ceiling or floor, ensuring sufficient clearance for the receptacles, wiring, and mounting hardware. Verify that there is access to appropriate pathways for electrical connections and that the opening aligns with space planning requirements.
- Power down the circuit at the main distribution panel and verify that the area is de-energized before starting work. Use a non-contact tester or equivalent to confirm absence of voltage in the work zone.
- Prepare the poke-thru opening by removing any coverings and ensuring the cutout matches the manufacturer’s specifications. Clean the opening edges and verify that mounting surfaces are flat and free of obstructions that could compromise fit or finish.
- Install the RC4ATC body into the opening, aligning it with the surrounding surfaces. Secure the unit using the supplied flange in the chosen finish (GY, BK, VY, AL, or BS) to ensure a snug, flush fit and prevent movement during use.
- Connect wiring per the installation diagram and local electrical code requirements. Decide in advance which receptacles will be standard versus isolated-ground, and route neutral, hot, and ground conductors accordingly while preserving proper separation for isolated-ground paths if selected.
- Reinstall any ceiling tiles or flooring components, ensuring a clean appearance and avoiding any pinching or abrasion of cables. Perform a functional test after restoring power to confirm all four receptacles operate correctly and that isolated-ground paths function as intended (if configured).
Frequently asked questions
- What is the RC4ATC? The RC4ATC is a four-receptacle poke-thru device designed to deliver four prewired 20A receptacles in a single assembly, with each duplex on a separate circuit for flexible power distribution in ceiling or floor openings.
- Can the duplex receptacles be isolated-ground? Yes. The duplex receptacles can be wired as standard receptacles or isolated-ground receptacles, depending on the installation and application requirements.
- What finishes are available? Finish flange options include gray (GY), black (BK), ivory (VY), and brushed metal finishes in aluminum (AL) and brass (BS) to suit different design goals.
- Where is this device best used? It is well-suited for conference rooms, classrooms, meeting spaces, auditoriums, and other commercial environments where neat, accessible power is important and where equipment may benefit from isolated grounding.
- Who should install it? A licensed electrician or qualified installer should perform the installation in accordance with local codes and the manufacturer’s directions to ensure safety and reliability.
Customer reviews
Showing - Of Reviews