Wiremold S4000 31.5" (800mm) Precut Raceway Cover

The Wiremold S4000 31.5" precut raceway cover is engineered to deliver a seamless, professional solution for concealing and organizing cables in commercial and industrial environments. Crafted from.040" (1.0 mm) stainless steel, this cover delivers exceptional durability, corrosion resistance, and a clean, contemporary look that complements modern interiors. With its snap-on cover design, it is optimized for fast installation and reliable performance, making it ideal for applications ranging from corporate offices and data centers to classrooms and healthcare facilities. The S4000 is RoHS compliant, ensuring that its materials meet stringent environmental and safety standards while maintaining top-tier cable management capabilities.

• Durable stainless steel construction: The S4000 employs a robust.040" (1.0 mm) stainless steel panel that resists impact, wear, and corrosion. This level of strength is particularly valuable in high-traffic or mission-critical spaces where cables are constantly accessed and reconfigured. The durable material also contributes to a premium aesthetic, delivering a sleek, professional appearance that remains consistent over time, even in challenging environments. Whether installed in a data room, a corporate office, or an educational facility, this precut cover stays looking sharp while protecting cables from dust, moisture, and accidental contact.
• Snap-on cover for quick, tool-free installation: The Snap-on cover design enables rapid installation and easy maintenance. Rather than requiring multiple fasteners or complex assembly, the cover can be snapped into place along the raceway system, providing a secure enclosure with clean lines. This feature reduces installation time on-site and simplifies future updates or reconfigurations. The ease of removal and reattachment also supports ongoing cable management as networks evolve, ensuring minimal downtime and disruption during changes.
• Precise length and layout for consistent center spacing: The S4000 is precisely 31.5 inches (800 mm) long, a format that aligns with standard modular layouts and makes planning cable routes straightforward. It is designed to accommodate 4 1/2" (114 mm) device plates mounted on 36" (915 mm) centers, promoting uniform spacing and alignment across multiple workstations or equipment racks. This predictable geometry helps installers achieve a tidy, professional look with fewer field adjustments, while ensuring compatibility with common plate sizes and mounting patterns.
• Optimized cable management for clear connectivity: Beyond concealing cables, the S4000 raceway cover is engineered to support clear connectivity and manageable cable pathways. Its precise fit and sturdy construction minimize cable sag, reduce exposure to dust and debris, and preserve accessibility for service and expansion. The result is a cable management solution that not only hides clutter but also improves airflow around equipment, reduces cable strain, and simplifies future upgrades or troubleshooting.
• RoHS-compliant material restrictions: The S4000 meets RoHS requirements for material restrictions, reflecting a commitment to environmentally responsible manufacturing. This compliance means fewer hazardous substances in the product and aligns with industry standards for sustainable electronics installation. RoHS compliance is particularly important in regulated environments such as educational facilities, healthcare settings, and offices that prioritize green building practices, offering peace of mind to procurement teams and facility managers.

Technical Details of Wiremold S4000 31.5" Precut Raceway Cover

• Material: Stainless steel
• Thickness: 0.040 inches (1.0 mm)
• Length: 31.5 inches (800 mm) precut
• Device plate capacity: Accommodates 4 1/2" (114 mm) device plates on 36" (915 mm) centers
• RoHS compliance: Meets RoHS material restrictions
• Mounting type: Snap-on cover compatible with precut raceway systems

How to Install Wiremold S4000 31.5" Precut Raceway Cover

• Plan your layout by determining the run length and placing 4 1/2" device plates at 36" (915 mm) center intervals. Confirm the 31.5" length of the S4000 matches your section needs to ensure a clean, continuous look.
• Prepare the raceway surface by cleaning any dust, dirt, or debris. If you are replacing an existing cover, disconnect power and remove the old cover according to local electrical codes and manufacturer instructions.
• Position the S4000 precut raceway cover along the prepared raceway run. Align the cover so the device plates will sit precisely at the intended 36" centers, ensuring an even, professional appearance across all mounting points.
• Snap the cover into place over the raceway system. Apply even pressure along the length until the cover securely engages with the base channel. The snap-on design minimizes the need for tools and reduces installation time while maintaining a tight, vibration-resistant fit.
• Install 4 1/2" (114 mm) device plates at the predefined centers and route cables behind the cover. Ensure cables are neatly organized, free of sharp bends, and fully seated to prevent pinching or interference with the cover. Finally, verify that all plates and the cover remain securely attached and that the overall appearance is uniform and clean.
• Test accessibility and cable management by gently manipulating cables to confirm routes remain clear, and confirm the cover remains properly seated after any service activity. If needed, re-seat the snap-on cover to restore a crisp, professional finish.

Frequently asked questions

• Q: What is the length of the Wiremold S4000 precut raceway cover? A: The S4000 is 31.5 inches (800 mm) long, designed for modular installations with precise, repeatable center spacing for device plates.
• Q: What material is used for the S4000 cover? A: It is constructed from stainless steel with a thickness of 0.040 inches (1.0 mm), delivering durability and a professional finish.
• Q: Is the S4000 RoHS compliant? A: Yes. The cover meets RoHS material restrictions, supporting environmentally responsible deployment in modern facilities.
• Q: How many device plates can be mounted on the S4000 system? A: The design supports 4 1/2" (114 mm) device plates mounted on 36" (915 mm) centers, enabling consistent spacing across installations.
• Q: How does the snap-on cover benefit installation? A: The snap-on cover allows quick, tool-free installation and easy removal for maintenance or reconfiguration, reducing field labor time while preserving a clean, uninterrupted appearance.