XPG SX8100 512 GB PCIe Gen3x4 NVMe M.2 2280 SSD

Engineered for speed and reliability, the XPG SX8100 512 GB NVMe M.2 2280 solid-state drive brings PCIe Gen3x4 performance to your desktop or laptop. Featuring 3D NAND flash and a compact M.2 2280 form factor, this drive delivers dramatically faster boot times, rapid game and application launches, and smooth handling of demanding workloads. Ideal for DIY enthusiasts, overclockers, and graphics professionals, the SX8100 is designed to upgrade aging SATA SSDs and HDDs, transforming everyday computing into a responsive and immersive experience.

• Ultra-fast PCIe Gen3x4 performance with sequential read speeds up to 3500 MB/s and sequential write speeds up to 3000 MB/s, enabling rapid OS booting, swift file transfers, and quick loading of large projects.
• Compact M.2 2280 form factor fits modern desktops and laptops, offering a simple, motherboard-friendly upgrade that doesn’t sacrifice PCIe lanes or create bulk in tight builds.
• 3D NAND flash for reliable endurance and consistent performance, helping you maintain high-speed access for long-term creative workloads, gaming sessions, and data-rich applications.
• NVMe protocol optimizes input/output operations with low latency and high queue depth, delivering snappy responsiveness for multitasking, editing workflows, and real-time rendering.
• Efficient design suitable for sustained performance in compact builds, with compatibility across a wide range of systems and a straightforward installation path for both new builds and upgrades.

Technical Details of XPG SX8100 512 GB

• Model: XPG SX8100
• Capacity: 512 GB
• Form Factor: M.2 2280
• Interface: PCI Express Gen3x4
• Protocol: NVMe (Non-Volatile Memory Express)
• NAND Type: 3D NAND Flash
• Sequential Read: up to 3500 MB/s
• Sequential Write: up to 3000 MB/s

How to install XPG SX8100

• Power down your computer and unplug from the wall. Open your case or laptop back panel to access the motherboard/M.2 slot.
• Locate an available M.2 2280 PCIe NVMe slot. If your motherboard requires a mounting screw, have it ready (often included with the motherboard or the case).
• Insert the SX8100 into the M.2 slot at a gentle angle (usually around 30 degrees) and push it down toward the motherboard until it lies flat.
• Secure the drive with the retaining screw. Ensure there is no interference with other components or heat sinks.
• Reconnect power, boot into your operating system, and enter BIOS/UEFI to verify the drive is detected. Initialize and format the drive as needed (NTFS/exFAT for Windows, APFS for macOS, or ext4/b2x options for Linux).
• Install the OS or migrate data as desired. For best performance, update your motherboard BIOS/UEFI and ensure you are using up-to-date NVMe drivers where applicable.

Frequently asked questions

• Q: What capacity is the XPG SX8100 available in?
• A: The unit described is a 512 GB model.
• Q: What form factor and interface does it use?
• A: It uses an M.2 2280 form factor with PCIe Gen3x4 interface and NVMe protocol for fast, low-latency storage access.
• Q: Can I use this drive as a system boot drive?
• A: Yes. NVMe drives are well-suited for bootable OS installations, gaming, and application workloads. Ensure your BIOS/UEFI recognizes the NVMe drive during setup.
• Q: Is 3D NAND flash used in this SSD?
• A: Yes, the SX8100 uses 3D NAND flash for reliable storage with solid endurance characteristics in typical consumer workloads.
• Q: Do I need additional cooling for this drive?
• A: In most standard builds, active cooling is not required for normal use, but sustained heavy workloads in compact chassis can benefit from good airflow or a heatsink in higher-end configurations.